- Jul 14, 2003
- 1,467
- 1
- 0
Yep, so I bought an opteron170(CCBBE - 0617FPMW), did a clean format and reinstall of windows, I also upgraded my PSU to an OCZ GameXtreme 600W and bought an Nvidia 8800GTS. I do currently have ONE stick of the ram in my sig, as I am RMA'ing the other one.
Right now I have it at 2.9ghz, stable, running for two days straight, ran prime on it, as well as gaming, 3dmark and many intensive applications.
I'm using the same RAM settings as I did with my previous overclock of my 3000+ as my ram hasn't changed, wondering if you guys suggest any modifications to the settings...
FSB: 290
Mult: x10
Pci E frequency: 100mhz
CPU Vid Startup: 1.475V
cpu vid control : auto/default
LDT Volt: 1.40V
Chipset Volt: 1.70v
DRAM Volt: 2.90v
DRAM config:
140=RAM/FSB: 07/10
CPC: Enable
TCL: 2.5
TRCD: 03
TRAS: 10
TRP: 03
TRC: 07
TRFC: 13
TRRD: 04
TWR: 03
TWTR: 02
TRWT: 04
TREF: 4708 cycles
Bank Interleave: Enabled
Increase Skew
Skew value: 200
Dram Drive Strength: weak 3
Dram Data Drive Strength: level 3
Max Async Latency: 0.8nano seconds
Dram response time: Fastest
Read Preamble Time : 0.5nano seconds
Idle cycle limit : 064
Dynamic Counter : Disable
R/W Queue bypass: 16x
Bypass Max: 08x
32byte granularity: Disable(4 bursts)
My temps for my proc and chipset under load max out at about 49-51C. I have tried upping the FSB to 300 but prime fails in a few minutes(on one of the cores). Any feedback would be appreciated, thanks.
Edit: http://img439.imageshack.us/img439/7750/cpuzzw3.jpg <-cpuz screenshot
Right now I have it at 2.9ghz, stable, running for two days straight, ran prime on it, as well as gaming, 3dmark and many intensive applications.
I'm using the same RAM settings as I did with my previous overclock of my 3000+ as my ram hasn't changed, wondering if you guys suggest any modifications to the settings...
FSB: 290
Mult: x10
Pci E frequency: 100mhz
CPU Vid Startup: 1.475V
cpu vid control : auto/default
LDT Volt: 1.40V
Chipset Volt: 1.70v
DRAM Volt: 2.90v
DRAM config:
140=RAM/FSB: 07/10
CPC: Enable
TCL: 2.5
TRCD: 03
TRAS: 10
TRP: 03
TRC: 07
TRFC: 13
TRRD: 04
TWR: 03
TWTR: 02
TRWT: 04
TREF: 4708 cycles
Bank Interleave: Enabled
Increase Skew
Skew value: 200
Dram Drive Strength: weak 3
Dram Data Drive Strength: level 3
Max Async Latency: 0.8nano seconds
Dram response time: Fastest
Read Preamble Time : 0.5nano seconds
Idle cycle limit : 064
Dynamic Counter : Disable
R/W Queue bypass: 16x
Bypass Max: 08x
32byte granularity: Disable(4 bursts)
My temps for my proc and chipset under load max out at about 49-51C. I have tried upping the FSB to 300 but prime fails in a few minutes(on one of the cores). Any feedback would be appreciated, thanks.
Edit: http://img439.imageshack.us/img439/7750/cpuzzw3.jpg <-cpuz screenshot