OVERCLOCKING THE NEW eVGA 3.3ns GF3 Ti200

[SpotDancer]

I hope that I am not infringing on any other thread regarding this video card. I apologize if I have inadvertently done so. I had a thread about this new video card in the "Hot Deal" section, and one of the members who has already received the card, suggested that we move over to this "Video" section to show the results of overclocking.

Ok........having said all that...........how is the card overclocking?

Anyone?

 

[RgrPark]

Link to the first thread
You started this thread knowing there already was one. Oh well, too bad everyone else knew that as well.

 

[SpotDancer]

<< Yes You are...not that you didn't know >>



Just so everyone knows, the Park Ranger was one of the "becoming more common" thread-crappers in my Hot Deals post. He is obviously doing the same thing in this one.

I think the link he referred to was the type of memory on the video card - and, yes there were a few oc'ing posts in the thread but primarily the thread was about the quality of the memory.

In any event, I have no problem subscribing to both threads in order to see the overclocking results.

Thanks everyone!

 

[SpotDancer]

<< There already is a tread on this >>



Very nice try on the "edited" version of your thread-crapping Parkster, but some of us are not quite that stupid to not be able to see behind the editing of your post. You are a small-minded thread-crapper, living in mushroom land, trying to cover his tracks.

Oh, yeah..............dont "tread" on me........it leaves tire marks.........thanks Parkster!!!:Q:Q

 

[bevo]

SpotDancer..Using riva tuner, I got it to 230/520 without problems and 8659 3d marks. It completed 3dmark 2001 at 230/530, but with tearing. I've got to take a break now to do some real work, but will resume where I left off later... The fan is pretty small, might do better with more cooling...

 

[felixlee]

good work bevo. Please keep us updated.

and get some sleep too!

 

[WHipLAsh13]

Admins please lock this thread. There is nothing more annoying than having to track 2 threads for the same info. No offense SpotDancer but they really should kill this thread and just continue with the one RgrPark linked.

 

[SpotDancer]

<< Admins please lock this thread. There is nothing more annoying than having to track 2 threads for the same info. No offense SpotDancer but they really should kill this thread and just continue with the one RgrPark linked. >>



If the administrators want to lock this thread so be it; however, the thread that you are referring to concerns the type of memory and makes no statement about overclocking the VIDEO CARD.

I am sure you know that there is more to overclocking a video card than the "memory" alone.

What will be will be!

 

[bevo]

WHipLAsh13..Why don't you mind your own business!

Spotdancer...Have any suggestions on what to try next?

 

[JSFord]

I have one Bevo. Keep the core at like 220 and then see how high the mem will go.
Core not as important as mem speed I think.

Let us know

I have one ordered as well.

JS

 

[Smbu]

<< SpotDancer..Using riva tuner, I got it to 230/520 without problems and 8659 3d marks. It completed 3dmark 2001 at 230/530, but with tearing. I've got to take a break now to do some real work, but will resume where I left off later... The fan is pretty small, might do better with more cooling... >>



That's not very good for 3.3ns ram. Maybe it is, because the card doesn't get as much voltage as the Ti500.

My Visiontek GF3 Ti500 has 3.8ns EliteMT ram and I've been running it fine at 590mhz for awhile now. And that one guy(macci?) who has the highest default 3dmark2k1 test with a regular GF3 (same 3.8ns EliteMT ram) increased the voltage to his card and threw on some watercooled pelts and was able to increase the ram speed on his card to 670mhz.

 

[WHipLAsh13]

Not my business....Whatever... As an member of these forums it absolutely is my business. I think there are lots of people here that hate when multiple threads are created for essentially the same topic. Stop being little babies and just use the original thread that was posted first on this forum.

 

[wilki24]

Or everyone can quit being so anal retentive and stop acting like the thread police. Geeze, if the mods want to lock a thread, they will. If not, then leave it be.

Man... what a bunch of petty, useless squabbling!

 

[SpotDancer]

<< WHipLAsh13..Why don't you mind your own business!

Spotdancer...Have any suggestions on what to try next? >>



Bevo.........if you go back to the original thread in Hot Deals, someone posted a link to an oc'ing utility. There is a shareware version, and a full-blown version that cost $29.95. I would, of course, try the shareware version first. It was one of the last posts in Hot Deals.

Second, you mentioned that the card doesnt have a very good fan. Maybe try a better one?

Does anyone know how to get a little more voltage to the memory??.........without burning it up, that is!!!!!!!!.........:Q:Q

Thanks!

 

[bevo]

I used riva tuner. It's as good as any. I'm not going to mod this with a better fan in case I decide to RMA it. I'll try some more combinations in a while, then depending on progress, I've got a Leadtech G3 ti200 that I will stick in to compare.

 

[SpotDancer]

<< I used riva tuner. It's as good as any. I'm not going to mod this with a better fan in case I decide to RMA it. I'll try some more combinations in a while, then depending on progress, I've got a Leadtech G3 ti200 that I will stick in to compare. >>



Good thinking!...........keep us posted.

Thanks!

 

[ck1016]

sounds to me like RgrPark and whiplash13 are the crybabies to me, The guy did the right thing moving an overclocking thread to the video section, do most of the tech testing here and feed the hot deals thread a little of the info. I say good job spotdancer! and I say go patrol a park rgrpark!, and get a life whiplash13!... insert middle finger emoticon here.

 

[WHipLAsh13]

ck1016 what do you wanna be when you grow up. Cause its obvious that your are some immature 15 year old crater faced kid who doesn't even read a post before responding to it. If you had read what RgrPark and I posted. I 100% agree that the overclocking topic should be posted here in Video. But the fact of the matter is that there is already a thread on this issue. I was simply stating that if everyone posted in one thread A) the thread would continue to grow faster since it would always be on top B) People wouldn't have to go back and forth from threads to find out the same information.

 

[SpotDancer]

<< Link to the first thread
You started this thread knowing there already was one. Oh well, too bad everyone else knew that as well. >>



My, my.........the same post edited for the second time. Wassupwitdat Parkster? Still trying to cover your tracks? Thats very hard to do when you are a mushroom. Its all soft and sweaty around there, and we can follow your footprints. You are just a thread-crapper.

Give it up, man - you are staring to look really, really foolish.

 

[RgrPark]

did i thread crap on your hot deal thread? go read it again idiot. I never said anything about the deal being not hot. I just called you an idiot for linking us to a news site that linked itself to the ad and you using it as a proof. You're so dumb. It's thread crapping if i said there were better deals you overnight senior member with over 50 posts in less than a week. Get a life. And when you started this REPOST, the other thread was ON TOP and you started this one acting like you didn't know about it. What a loser. And stop PMing me to get off your sorry back. HAHA what a n00b Neffer.

So pathetic your attempt to repost has just been turned into a flame thread and nothing more.

OH i'm editing this again to say:

What tracks am i trying to cover? You are an idiot and this thread does not belong ANYWHERE.

IT SHOULD BE LOCKED and you should be BANNED for using RACE related comments in your PM to me.

 

[SpotDancer]

<< did i thread crap on your hot deal thread? go read it again idiot. I never said anything about the deal being not hot. I just called you an idiot for linking us to a news site that linked itself to the ad and you using it as a proof. You're so dumb. It's thread crapping if i said there were better deals you overnight senior member with over 50 posts in less than a week. Get a life. And when you started this REPOST, the other thread was ON TOP and you started this one acting like you didn't know about it. What a loser. And stop PMing me to get off your sorry back. HAHA what a n00b Neffer.

So pathetic your attempt to repost has just been turned into a flame thread and nothing more.

OH i'm editing this again to say:

What tracks am i trying to cover? You are an idiot and this thread does not belong ANYWHERE.

IT SHOULD BE LOCKED and you should be BANNED for using RACE related comments in your PM to me. >>



Ewwwwwwwww............now we are using the race card are we? Johnny Cochran Jr., I presume.

Howz about your referral to my sexual orientation? I wont use the word because it is disgusting. Just like you, mushroom....disgusting!!!

 

[StuckMojo]

omg STFU and let the thread go.
stop crying. jesus. so what if there are 2 threads. you dont like this one, don't read it. my god. what's wrong with you people?

 

[chizow]

Lotta cryin' and crappin' goin on here............

<breaks out his pampers and pacifiers>

Chiz

 

[PullMyFinger]

Flussssshhhhhh.

Yep, another thread down the toilet.

FYI RgrPark, read the first words of this thread. Who cares if there is another "similar" thread, are you going to include the "I noticed that other thread first" comment in your resume, will it help you get laid?? NO, so quit your crying and grow up.:disgust:

<edit>
Oh yeah, almost forgot, I too would like to find out how to get more voltage to the card/ram.<edit>

 

[Smbu]

Well, from reading the other thread, it appears that these boards are not made on an 8 layer pcb like Ti500's and a few other Ti200 cards(e.g. Suma Ti200 SE). So voltage might not be the only problem and the actual pcb board itself might not be able to handle such high speeds.