Originally posted by: Valvoline6
Just like you oldfart I had a C1 2.4b before the one I have now and it would only do 145 fsb. It did that at default voltage and wouldn't go any higher, no matter what.... It hit the wall. Wouldn't even do 146....... The thing couldn't do 5 minutes of P95 above 145...
Did you try 2-2-2-6? My XMS3200C2 works perfectly @ those timings @ DDR400.Originally posted by: Valvoline6
I just ran P95 all night (9 hours) at 150 fsb. Before that I ran it for about an hour and got an error. I had my memory at 2-2-2-5 @ 400 mhz. I changed my timings to SPD 2-3-3-8 and then P95 ran all night. I am a little disapointed that Corsair PC3200 can't do 2-2-2-5 @ 400... I will run memtest86 but if it throws an error on P95 whats the use.
I just started P95 @ 160 fsb..... lets see if she can make it (memory at 400 mhz, timings by spd).
BTW: How many hours of P95 tortute test is needed at minimum to declare stability? An excepted standards out there?
That is is same here.Originally posted by: Jgtdragon
My experiences with c1 is that once you hit the wall with default voltage, it won't go much further. No matter what voltage you throw at it.
Originally posted by: oldfart
Did you try 2-2-2-6? My XMS3200C2 works perfectly @ those timings @ DDR400.Originally posted by: Valvoline6
I just ran P95 all night (9 hours) at 150 fsb. Before that I ran it for about an hour and got an error. I had my memory at 2-2-2-5 @ 400 mhz. I changed my timings to SPD 2-3-3-8 and then P95 ran all night. I am a little disapointed that Corsair PC3200 can't do 2-2-2-5 @ 400... I will run memtest86 but if it throws an error on P95 whats the use.
I just started P95 @ 160 fsb..... lets see if she can make it (memory at 400 mhz, timings by spd).
BTW: How many hours of P95 tortute test is needed at minimum to declare stability? An excepted standards out there?
You have a Week 34 - 2002 chip made in Costa RicaOriginally posted by: srxtreme
I got a BO stepping ordered it in Jan thought for sure I'd get a C1 but no luck
It's a SL6EU pack date 11/22/02 Manufacturing Plant ?
System performs pretty well well at 150 (2700) but become unstable over that and fails at 160.
Still can't complain for a $160 cpu.
I may put it in my wife system and try again for a C1.
What you all think I'd have better luck with another 2.4 or try a 2.53
How do you tell where the cpu manufacuter at?
Here's all the info on the retail box
Prod Code:BX80532PE2400DSL6EU
FPO Batch# 3234A696 MM#848392
Version # R97227-01