- Mar 16, 2003
- 94
- 0
- 0
Ok, finally got around to overclocking the 2.4.... look at system specs for all details on system:
Bios v1.1
2x512 Kingston hyperX 3500
2x Western Digital Raptors in raid 0 on ich5
Antec True 550w
Swiftech MCX4000 w/ Antec Smartfan I (I had a vantec tornado and an slk800u on this before and it kept cpu at about 44C @ idle, but this set-up is a little quieter )
@ Default - @ idle - Ambient 31C, System 34C, CPU 45.5C, PWM 39-42C
PCMark02:
CPU 6024
MEM 7950
HD 2361
Sandra:
Mem Bandwidth 4553/4505
HD 67412
@ 271 fsb or 3252 mhz, vcore 1.6 (board undervolts by about .025 so its about 1.57-1.58), mem is at 2.7 - MEM IS AT 5:4 for DDR 434
- @ idle - Ambient 31C, System 35C, CPU 48.5C, PWM 40-42C
PCMark02:
CPU 7392
MEM 9219
HD 812
Sandra:
Mem Bandwidth 5068/5046
HD 48019
Ok, I have yet to run Prime 95 or memtest... how long should these take to run? I let memtest sit there for atleast 45 minutes and it didn't cycle once... no errors found in that time... and the servers were down with prime 95.
So, I do not have any temperatures for the cpu at "load". On a side note I am looking for a little higher cfm fan to see if I can bring temps down a degree or two... right now at 39db its putting out 53 cfm... suggestions on panaflow or smartfan II? (sfII seems loud though @ 49db and I refuse to put the tornado back in @ 57db lol). Will be ok to use 92mm if needed.
BUT WTF HAPPENED TO MY RAPTORS IN RAID 0????? As soon as I overclocked, it killed them! It takes longer to boot now... and the benches are less than stellar.
Bios v1.1
2x512 Kingston hyperX 3500
2x Western Digital Raptors in raid 0 on ich5
Antec True 550w
Swiftech MCX4000 w/ Antec Smartfan I (I had a vantec tornado and an slk800u on this before and it kept cpu at about 44C @ idle, but this set-up is a little quieter )
@ Default - @ idle - Ambient 31C, System 34C, CPU 45.5C, PWM 39-42C
PCMark02:
CPU 6024
MEM 7950
HD 2361
Sandra:
Mem Bandwidth 4553/4505
HD 67412
@ 271 fsb or 3252 mhz, vcore 1.6 (board undervolts by about .025 so its about 1.57-1.58), mem is at 2.7 - MEM IS AT 5:4 for DDR 434
- @ idle - Ambient 31C, System 35C, CPU 48.5C, PWM 40-42C
PCMark02:
CPU 7392
MEM 9219
HD 812
Sandra:
Mem Bandwidth 5068/5046
HD 48019
Ok, I have yet to run Prime 95 or memtest... how long should these take to run? I let memtest sit there for atleast 45 minutes and it didn't cycle once... no errors found in that time... and the servers were down with prime 95.
So, I do not have any temperatures for the cpu at "load". On a side note I am looking for a little higher cfm fan to see if I can bring temps down a degree or two... right now at 39db its putting out 53 cfm... suggestions on panaflow or smartfan II? (sfII seems loud though @ 49db and I refuse to put the tornado back in @ 57db lol). Will be ok to use 92mm if needed.
BUT WTF HAPPENED TO MY RAPTORS IN RAID 0????? As soon as I overclocked, it killed them! It takes longer to boot now... and the benches are less than stellar.