Make sure your chipset voltage is set for 1.7v
Be sure your using higher voltage for the DDR extra FSB
Try using divider 5/5 or 6/6
(I use 5/5)
Also ... use one stick of memory at a time to see if slots or one stick is an issue.
Use memtest86+ to test your memory...
There is plenty of info at Abit forums...
If you can run OK at DEFUALT settings... I'd say you have other issues at the higher FSB...
You need to take the time to SLOWLY up the FSB and TEST along the way ...
hmm...my voltage is way too low then, I didn't realize that I need 1.7v to get that high, most people on boards were saying they were getting 3200+ @ near stock voltage. Okay I'll try that, thanks
Originally posted by: bmillerd
hmm...my voltage is way too low then, I didn't realize that I need 1.7v to get that high, most people on boards were saying they were getting 3200+ @ near stock voltage. Okay I'll try that, thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.