- Jul 22, 2013
- 175
- 3
- 81
an old build I had used till recently since moving to AMD and I came to resurrect it to pass to my ladies daughters to use. I removed the heatsink and installed a different one, installed ram and I get long 3-4 second beeps that are looping. I get no signal on the monitor. I used 2 boards but to no avail.
my question is
-even if the psu fires up the fans and lights on the MB (bios led screen post codes) can it still be defective?
it doesnt seem defective as the fans run, the cd drawer opens and lights on the MB are up. but I also get no signal on the screen. tried to remove cmos battery and I pressed the bios reset button
1000w tagan psu (4 years old)
started with evga 780i FTW and it wouldnt post no matter what so installed a backup MB asus p5g41t- m lx and it wouldnt post either.
Q6600. would OC to 3.6 (winter) and 3.2 (summer)
2gb ram kingston hyperx 8500 ddr2 I had 2x2 kingston sticks and one stick is lost. I also have 2x1gb so for now thats what I have till I get a 4gb set.
EVGA 9800GTX. I installed my gtx 660 from my new pc inside and it too wouldnt give a signal.
its very dusty in my country. I use a makeup (blush) brush every few months to clean it. ive disassembled/cleaned/regooped/assembled my 9800gtx many times. I do have a new 600w antec psu I will try to use but its being used in the current pc at my ladies house.
any suggestions?
my question is
-even if the psu fires up the fans and lights on the MB (bios led screen post codes) can it still be defective?
it doesnt seem defective as the fans run, the cd drawer opens and lights on the MB are up. but I also get no signal on the screen. tried to remove cmos battery and I pressed the bios reset button
1000w tagan psu (4 years old)
started with evga 780i FTW and it wouldnt post no matter what so installed a backup MB asus p5g41t- m lx and it wouldnt post either.
Q6600. would OC to 3.6 (winter) and 3.2 (summer)
2gb ram kingston hyperx 8500 ddr2 I had 2x2 kingston sticks and one stick is lost. I also have 2x1gb so for now thats what I have till I get a 4gb set.
EVGA 9800GTX. I installed my gtx 660 from my new pc inside and it too wouldnt give a signal.
its very dusty in my country. I use a makeup (blush) brush every few months to clean it. ive disassembled/cleaned/regooped/assembled my 9800gtx many times. I do have a new 600w antec psu I will try to use but its being used in the current pc at my ladies house.
any suggestions?
Last edited: