Please help noob with OC setup

[WinkyBlinky]

Please help me out with my setting; I just can?t get it to work out. I have spent the last 2 day reading all I can but do not know what settings to use for the ram.
I can?t go higher then 9*325 for cpu speed of 2.92
I have never OC in the past so this is my first try at it.
What is the best OC I can get with my current setup?



Setup

Intel D975XBX2 MB rev 505
2 x 1 gig of Kingston value ram @667. KVR667D2N5/1G
E6600 CPU with stock HSF on it.
BIOS 2333
Xclio 500W PS
Antec P180 case
EVGA 7600gs VC


BIOS Options available for ram

Reference Frequency Default, 333, 266, 200, 133
Memory Frequency 800, 667, 533, 400
Tcl, trcd, trp, trasmin are now set to 5-5-5-15
Mem voltage @1.84


Thanks for all your input.

 

[gOJDO]

1. Disable:
- ?Limit CPUID Max to 3?
- ?C1E?
- ?EIST?
- Virtualization Technology
- No-Execute Memory Protect
- any ?spread spectrum?
- any overvoltage protection
- any other thing you don?t use
2. Set:
- PCI Express (PCIe) frequency @100Mhz (?Auto? for DS3/DS4/DQ6)
- PCI frequency @33Mhz
- DRAM/DIMM Voltage (vDIMM) to 2.1V or 2.2V if specified by RAM (+0.3V or +0.4V)
- CPU Voltage (vCore) to 1.4v
- CPU Host Clock/Frequency (FSB) to 333Mhz
- CPU Clock Ratio or Multiplier to the default value, x9
- DRAM Freqfency to 533MHz(266MHz DDR), tCL=5, tRCD=5, tRP=5, tRAS=15
3. Increase:
- MCH Voltage (vMCH) by +0.1V
- FSB Voltage (vFSB) by +0.2V
- SB Voltage (vICH) by +0.1V from default-lowest value
4. Further attempts:
- Up even more FSB by 5Mhz increasement
- Up even more vCore if needed by 0.025V increasement
5. Stability test:
You will need the following programs: CPU-Z, Prime95, Core Temp, SpeedFan
a) Fire up CPU-Z and keep it running in the background to monitor clock speed
b) Fire up Core Temp to monitor temperature
c) Fire up SpeedFan to monitor voltages
d) Run dual instances of Prime95 in torture mode for 2 hours
If stable go to Part 4-Further Attempts, if not go back to last stable frequency.
6. Finalising:
-Lower vCore by one notch at a time until lowest possible while maintaining the same stableness
-Do the same for vMCH, vFSB, vICH, DRAM after the above step is completed
-Record the BIOS settings which works

 

[myocardia]

Jump directly to 333. These motherboards use memory straps on the northbridge, and 325 is much harder for your RAM to do than 333, or even 340.