*POLL-What vcore your P4 C running at?

[batmang]

If your overclocking, please state your cooling solution and vcore and stuff.

 

[batmang]

.

 

[Budman]

Still on stock vcore

12 x 260mhz = 3.1ghz using Alphal PAL8942 .

I could go higher but I hate putting extra juice to a P4.

 

[bjc112]

Not currently running a P4 but the latest one I built was a ...

2.4B@3ghz Retail HSF...

Vdimm 2.8v
Vcore 1.6

50c loaded.

 

[infinite012]

12x260 = 3.1GHz
SLK-800(u) with Adda 80mm fan
1.55 vcore selected in BIOS, but everywhere I look it says 1.50 to 1.53v.

Oh, why doesn't my board do DCDDR like it's supposed to? I have 2 same size PC3200 memory modules.

 

[Lyfer]

13 x 250MHZ, 3250MHZ (1ghz FSB), 5:4 ratio, All voltages at stock, 1gb crucial PC3200 ("Micron" chips), Abit IS7, SLK800U w/80MM Sunnon 50CFM fan.

 

[WarCon]

IC7 - 2.4C @ 3.0 (250 fsb * 12) - default vcore. If I go single channel memory, the processor will do 263 fsb *12 @ 1.6vcore.

I sure hope this upcoming bios helps out with my overclock as I feel its the memory thats mostly holding me back.

Oops, forgot the temps.
Ambient ( 21C ),
Case temps - idle ( 22C ), full load ( 25C ),
Processor temps - idle ( 38-39C ), full load - ( 53-55C ) with a Zalman CNPS7000A - Alcu.

 

[orion7144]

IC-7G 2.4C @ 275 FSB 1:1 w/ OCZ PC3700 Gold 1.55 Vcore and 2.8 Vdimm. Using stock cooler.

 

[PClark99]

IC7 250FSB 2.4c@3000 1.504V actual.