Originally posted by: Shmee
i7 920 D0 @ 4.2 GHz HT off
1200 MHz DDR3 7-7-7-20 6GB
23.83 Relative speed
11920 Knodes/s
Hope to get higher, possibly beat Rubicon's speed
BTW, to get such high ram frequency and BCLK with 12 GB and a high OC, did you have to do anything like up PCIE frequency, do board mods, or use crazy QPI voltage or anything else crazy?
Originally posted by: Rubycon
Machine specs?
Originally posted by: Shmee
BTW, Rubicon, are you using water or high end air on that?
Originally posted by: Rubycon
Machine specs?
Originally posted by: Shmee
i7 920 D0 @ 4.2 GHz HT off
1200 MHz DDR3 7-7-7-20 6GB
23.83 Relative speed
11920 Knodes/s
Hope to get higher, possibly beat Rubicon's speed
BTW, to get such high ram frequency and BCLK with 12 GB and a high OC, did you have to do anything like up PCIE frequency, do board mods, or use crazy QPI voltage or anything else crazy?
Nothing out of the ordinary used. BCLK max the P6T7 is around 215 ish. Board does turbo throttle at full load so multiplier drops to 20X so in essence full load throughput is only equal to about 4.3GHz which isn't too bad.
p.s. your mark would be considerably higher with HT ON.
Originally posted by: oogabooga
Q660 @ 2.40GHZ
4.00GB DDR2
Logical Processors found :4, used :4
Relative Speed : 14.53
Kil Nodes per second : 6974
Originally posted by: GLeeM
DDR3 6 GB CPU-Z shows timings are 9-9-9-24-1T (how do I find speed?)