Power LED connector

[dblevitan]

Hi,
I just bought an Antec Performance Plus 660B. It's a great case, but my problem with it is that the Power LED connector is 2 pins, while the connector on my Asus is a 3 pin (2 wireS). I know that I can probably find a 3 pin connector like that and plug the wires into there, but are there any adaptors out there for this sort of thing?
Thanks,
David

 

[DrVos]

You can just splice the power connector with a razor blade and connect the wires to the appropriate pins. I had the same problem with my ECS K7s5a

 

[baneonrt]

Same problem with my 880. Luckily I have an old AT case around that had the right connector so I just swapped the connector housing. Very easy to do. You only have to gently bend the little plastic tabs back to release the wire from the connector. I've emailed Antec twice about this and a few other things but with no response in over 2 weeks

Steve

 

[dblevitan]

Well, I actually sent them a note last night, and they've already gotten back to me and have said that they'll ship the connector out. Great customer service actually. I would try e-mail them again at their tech support address.
Thanks for the advice,
David Levitan

 

[Strych9]

I had the same problem with my 1080 and Abit KR7A-RAID. I e-mailed Antec a while back and they said they were fixing the problem. They offered to send me a new LED wire with a three prong connector. They ended up sending me a whole new front bezel. Problem is it still had the two-connector wire. Nice try though. I ended up cutting and making my own.

 

[DS1MCSE]

Heh, at least you had a spare to work with then!