---------- Quad Overclock Thread! ----------

[swtethan]

Please enter in yout info like this:

Your Screen name
Model, speed, voltage, cooling, stepping
motherboard






Chart



----------Air Overclocks

XtremeTiramisu @ xtremesystems
Q6600: 3.7GHz @1.44v (TR U120x) #G0
---Board: Asus P5k Deluxe P35



Swtethan
Q6600: 3.6GHz @1.4v (TR U120x) #G0
---Board: Gigabyte P35 DS3-P



ChronoReverse
Q6600: 3.6GHz @1.45v (Scythe Ninja) #G0
---Board: Gigabyte GA-P35-DS3P



crazyea @ xtremesystems
Q6600: 3.6GHz (TR U120) #G0
---Board: P5k Premium



ICER @ xtremesystems
Q6600: 3.6GHz #G0
---Board:



Markfw900
Q6600: 3.6GHz @1.39v (TR U120x) #G0
---Board: Gigabyte DQ6
Q6600: 3.2GHz @1.328v (Scythe Ninja) #B3
---Board: Gigabyte DS3 P965
Q6600: 3.2GHz @1.328v (Scythe Ninja) #B3
---Board: Asus P5K



sgrinavi
Q6600: 3.6GHz (Tuniq Tower) #G0
---Board: Gigabyte GA-P35C-DS3R



idiotekniQues
Q6600: 3.5GHz @1.45v (TR U120x) #G0
---Board: Gigabyte dQ6 rev. 2



McCartney
X3220: 3.5GHz #B3
---Board: Asus Striker Extreme



Noubourne
Q6600: 3.5GHz @1.36v (TR U120) #G0
---Board: ASUS P5K Deluxe



XILIKON @ xtremesystems
Q6600: 3.4GHz @1.4v (TR SI-128) #G0
---Board:



aka1nas
Q6600: 3.2GHz @1.34v (Tuniq) #B3
---Board: eVga 680i SLI T1



BonzaiDuck
Q6600: 3.2GHz @1.412v (AIR) #B3
---Board:



Diogenes2
Q6600: 3.2GHz @1.26v (TR U120) #B3
---Board: GA-965P-DS3 V1 ( F4 )



Kingfetty
Q6600: 3.2GHz @1.3125v (Scythe Ninja) #B3
---Board Abit IP35 Pro



eelw
Q6600: 3.1GHz @1.37v (Thermaltake V1) #B3
---Board: eVGA 650i Ultra



BiGi
Q6600: 3.04GHz @1.3V (Zalman 7000) #B3
---Board: Gigabyte GA965 DS3 Bios F12, Version 2.0



adairusmc
Q6600: 3.0GHz @1.26v (TR U120x) #B3
---Board: Asus P5N32-E 680i



DaPoets
Q6600: 3.0ghz @1.28v (Stock) #B3
--Board: Intel D975XBX2 Bad Axe 2



Viper GTS
Q6600: 3.0GHz @1.244v (Big Typhoon) #B3
---Board: EVGA 680i A1



ViRGE
Q6600: 3.0GHz @1.31v (Tuniq Tower 120)
---Board: Gigabyte GA-P35-DS3R




----------Water overclocks

genec57
Q6700: 3.8GHz @1.56v (water) #G0
---Board: P5K Deluxe P35


Aigomorla
X3210: 3.37GHz @1.41v (water) #B3
---Board:
X3220: 3.75GHz @1.5v (water) #B3
---Board:
Q6600: 3.73GHz @1.46v (water) #G0
---Board: ASUS P5K-DLX



tylerw13
Q6600: 3.6GHz @1.4v (water) #G0
---Board: eVGA 680i



96redformula @ hardforums
Q6600: 3.5GHz @1.35v (water) #G0
---Board:



WoodButcher
Q6600: 3.419GHz @1.4v (water) #G0
---Board: Asus P5K-VM



Skyguy
Q6600: 3.4GHz @1.43v (water) #B3
---Board: Gigabyte 965P-DS3 Rev.3.3



Acanthus
Q6600: 3.3GHz @1.42v (water) #B3
---Board: Gigabyte GA-P35-DS3R



stevty2889
Q6600: 3.1GHz (water)
---Board: Asus P5W DH Deluxe





----------Other Cooling

Idontcare
QX6700: 3.73GHz @1.35v (Vapochill LS) #B3
---Board: Asus Striker, Bios v403



----------Engineering Sample Chips



JAG87
X3230 ES: 3.6GHz @1.40 (Water) #G0
---Board: eVGA 122-CK-NF68-A1 680i
QX6700 ES: 3.2GHz @1.34 (Zalman 9700) #B1
---Board: eVGA 122-CK-NF68-A1 680i




Toadster
QX6700 ES: 3.33GHz @1.31v (Zalman 9500) #G0
---Board: Intel D975XBX2

 

[Markfw]

1 1/2 hours ? I can do 3.4-3.5 for that... It takes 3 days for me to say solid.

So my two I list at 3.2

Edit: Cooling Ninja sythe

vcore 1.4625 bios, 1.328 load

Temps 65c full load 24/7

 

[aigomorla]

wow, 1.46 for 3.7ghz.

a bit too much if i dont say so myself. You DONT want to push these guys on air higher then 1.4Vcore real. And trust me on these. Even the G0's will get out of hand once u exceed that voltage.

But anyhow, my X3220 is 3.6ghz solid on WCG for 1 week straight.

My Q6600 is also 3.6ghz solid on WCG straight.


i throttled them both down now to a modest 3.375 because XS forums has finally finished overtaking clubic to be ranked #2. So they didnt need the 35-40k points my rigs were bringing in each day.

 

[stevty2889]

Mine is at 3.1ghz on water cooling.

 

[RussianSensation]

Originally posted by: aigomorla
wow, 1.46 for 3.7ghz.

a bit too much if i dont say so myself. You DONT want to push these guys on air higher then 1.4Vcore real.

Any specific reason why ? C2D runs fine at 1.45-1.50 on air. I am assuming you are talking about the consequence of raising VCore this high related to containing heat, not related to damage by overvoltage.

 

[swtethan]

If you could, include Voltage, and cooling used

also stepping!

 

[genec57]

Q6700 @3800 on water. vCore @ 1.5625 bios, 1.51 actual
Idle temp is 33c
Orthos load Core 0, 66, Core 1, 66
Stable so far but has only been running 30minutes.

How do you get Orthos to load all four cores? If I run two instances I just get cores 0 and 1 twice.

 

[Thor86]

What is the point of this without actual screen shots to prove oc stability?

 

[swtethan]

Originally posted by: Thor86
What is the point of this without actual screen shots to prove oc stability?

Its NOT a contest to see how high anyone can go. Its a comparison of quads and steppings to see the averages of each chip from what stepping goes where at what voltage.

 

[tylerw13]

i have a q6600 G0 stepping....its running @ 3.6 on a 680i @ 1.40 i think i could push it higher but my mobo has major fsb hole for some odd reason!!!

 

[swtethan]

Please indicate if youre on water or air (include air model)

dont forget your stepping!

 

[swtethan]

I will seperate these into water or air categories when there is enough data

 

[Acanthus]

Aigos is an ES, and its on water.

 

[Diogenes2]

Q6600
B3
3250
1.26v load ( Auto in BIOS )
Ultra-120

GA-965P-DS3 V1 ( F4 )

 

[idiotekniQues]

id refer you to some serious Q6600 G0 OC's going on at ocforums and xtremesystems forums.

breaking 3.5 from a few guys already.

 

[swtethan]

you could post some of the results and I will put them on the chart

 

[genec57]

To achieve stability I had to increase my vCore to 1.56

 

[Toadster]

you guys may want to try BOINC for multi-core stress testing...

http://boinc.berkeley.edu/

I've run it on 16-way servers, it really pushes all your cores
if this has already been covered, just move along

 

[swtethan]

do you want to add your cpu?

 

[Toadster]

Originally posted by: swtethan
do you want to add your cpu?

LOL - sure...

QX6700 (G0) ES 3.33GHz @ 1.31v air cooled (Zalman 9500)

it may go higher, I've only had it for a week...

 

[Markfw]

Originally posted by: Toadster
you guys may want to try BOINC for multi-core stress testing...

http://boinc.berkeley.edu/

I've run it on 16-way servers, it really pushes all your cores
if this has already been covered, just move along

F@H stresses more than BOINC for my experience, and thats what I run. It's SMP client has 4 threads, designed for quad-cores.

BTW, I edited my above post, and forgot to add B3 as my steppings.

 

[Idontcare]

B3 QX6700
3.73 GHz @ 1.35 Vcore
Vapochill LS

 

[idiotekniQues]

Originally posted by: swtethan
you could post some of the results and I will put them on the chart

sure.

from hardforums - Core 2 Quad Q6600 G0 3.50ghz @ 1.35Volts for now ---Enhance(Silverstone) 500W PSU - watercooling USERNAME IS 96redformula

from xtremesystems - Core 2 Quad Q6600 G0
24/7 @ 9x400 = 3.6GHz AIR - username is ICER

FSB411 x 9 to get 3699mhz or 3.7ghz Q6600 G0
1.500v BIOS set = 1.464v idle and 1.4480v full load - AIR - username is XtremeTiramisu

Intel Q6600 G0 L723A765 @ 3.4 GHz (9x378 MHz) at 1.4v with Thermalright SI-128 and Silverstone FM121 fan. - username is XILIKON


there are more but i am too lazy right now to dig them up.

 

[aigomorla]

some updates.

Q6600 (B3) 1.48Vcore Real @ 3.6ghz 400fsb x 9
X3220 (B3) 1.50Vcore Real @ 3.75ghz 417fsb x 9
X3210 (B3) 1.41Vcore Real @ 3.37ghz 422FSB x 8



Q6600 (G0) ES 1.5Vcore Real @ 4050ghz 450fsb x 9
<screen shots of this to come once i get my rig redone.>


All is/was under watercooling. The X3220, and both the Q's were recycled in my main rig. And i messed up the loop by swaping the CPU out too many times. >

The cheapest H2O kit was on the X3210, but it still used a MCR320 as a radiator.


Fair warning, if you guys need to push 1.4Vcore+ on the CPU, i highly recomend you guys getting water, expecially if its going to be loading 100% of the time.

 

[eelw]

Q6600 B3 OCed to 3.06
Vcore 1.32
ThermalTake V1

edit

EVGA 650i Ultra with 2x1GB Corsair DDR2 533