q6600 b3, 1st try
i just picked a random fsb and started running it, hahahaha
specs:
q6600 b3
Ttake sonic tower (underrated hsf) with 2 x 120mm fans in quiet mode, i've had this baby for at least 3 years
gigabyte 965p-ds3 f12 bios
2 x 1gb corsair xms pc6400 5-5-5-15 (4-4-4-12 @ 2.0 mult to the fsb)
asus passive hsf 7600gs
antec 350w smartpower psu (!!!)
cpu set to 1.375v in bios, 1.376v idle, looks like 1.296v under load
also looks like 37°/33° idle, 57°/62° load (SpeedFan)
my rails are all off...
prime 95 x 4 (each instance in a diff folder, each instance set to a core) running @ priority 9
question: looks like 1 'die' is off (cores 0 and 2 being 5° higher),
anyone know how i can fix that?
will show pics of rig later..
edit: here's a dirty one
inside
? side panel off
? my sad rendition of "push-pull"
--- because i couldn't mount it the other way (90°) because it hit caps,
--- so i had to put it that way and drill holes to mount the fan
? yes, cable management is horrible right now
? also stuck a 40mm fan on the NB
? very silent, probably around 23-25dba
edit: i'll probably leave it at 3.15ghz (9 x 350mhz), 3.2 wouldnt cut it, but everything's been rock stable @ this speed
also, AS5 settled down so my new idle/load temps are ~30°/~56° (SpeedFan)