Question for those with Antec solution SLK1650 case!

[maseAT]

Two questions, actually. Was there a tag on yours when you opened it that said something like the fan on the PSU wouldn't start when the computer powers up, but your computer is fine? I vaguely remember something like that, but I lost the tag..

Also, I've tried both orientations of the HDD LED, POWER LED, etc on my MB (ECS KN1 SLI Lite) and the leds on the case refuse to turn on in either orientation. What is the correct orientation?? with the labels facing the top of the case or the bottom?

Thanks!!

 

[zagood]

colored wire +, white wire -

weird tag on there. might have had something to do with the fans running too slow for a motherboard to register it.

-z

 

[imported_nunya]

I just finished a build with a SLK1650B. The PSU did have a tag that read something to the effect that the PSU fan would only turn on when it was hot enough to need it. It hardly spun up through 12 hours of Prime95. I didn't have any problems at all with the LEDs.

 

[maseAT]

Originally posted by: nunya
I just finished a build with a SLK1650B. The PSU did have a tag that read something to the effect that the PSU fan would only turn on when it was hot enough to need it. It hardly spun up through 12 hours of Prime95. I didn't have any problems at all with the LEDs.

whew.. i was freaking because people were saying that the psu was probably bad.. and then i had a faint recollection of a tag that said something like that.. so to confirm, the fan on the back of your psu usually is not on, only sometimes?

 

[cooliodealio]

Originally posted by: maseAT

Originally posted by: nunya
I just finished a build with a SLK1650B. The PSU did have a tag that read something to the effect that the PSU fan would only turn on when it was hot enough to need it. It hardly spun up through 12 hours of Prime95. I didn't have any problems at all with the LEDs.

whew.. i was freaking because people were saying that the psu was probably bad.. and then i had a faint recollection of a tag that said something like that.. so to confirm, the fan on the back of your psu usually is not on, only sometimes?

How many times do you need him to say it?

 

[AntecCSR]

http://www.antec.com/us/support_roductInfo_FAQ.php?Qnumber=1&FAQno=19

 

[maseAT]

=) thanks guys.. now that i know for sure one thing isn't the problem, i can move on to the next..