So it's time for me to update my system with the impending DX10 and all the snazzy new hardware. I've started putting the pieces together and I wanted to see what you guys thought. One major question I have is about a cooling solution and if I should use water or air. Please see my thread in the Cases & Cooling section. I welcome any suggestions and comments you might have.
CPU: E6600
MoBo: ASUS P5N-E
RAM: Corsair XMS-2 2GB DDR2 800
GPU(s): BFG Tech 8800GTS
HDD: Seagate Barracuda 200GB SATA 3.0GB/s
Case: Antec 900
PSU: OCZ GameXStream 600W
Some notes:
-I plan on expanding the RAM to 4GB, but for now I just wanted to start out with 2.
-I'm still up in the air as to the GPU that I want, and whether or not to go SLI. Right now I'm leaning more towards a single 8800GTS or GTX and then adding a second for SLI in the future.
-I realize that the 600W PSU is not sufficient for an SLI system so that's something else that's tentitive. However, would that PSU be sufficient for a single-card solution?
Thanks guys.
CPU: E6600
MoBo: ASUS P5N-E
RAM: Corsair XMS-2 2GB DDR2 800
GPU(s): BFG Tech 8800GTS
HDD: Seagate Barracuda 200GB SATA 3.0GB/s
Case: Antec 900
PSU: OCZ GameXStream 600W
Some notes:
-I plan on expanding the RAM to 4GB, but for now I just wanted to start out with 2.
-I'm still up in the air as to the GPU that I want, and whether or not to go SLI. Right now I'm leaning more towards a single 8800GTS or GTX and then adding a second for SLI in the future.
-I realize that the 600W PSU is not sufficient for an SLI system so that's something else that's tentitive. However, would that PSU be sufficient for a single-card solution?
Thanks guys.