I know this is kind of a dead thread, but I've been lurking for a while and wanted to share my experience with the Wintec RAM in the original posting. I did my first build a few weeks ago, and didn't really do my homework very well on some things. I'm on an Epox 8VTAI mobo with the Via KT880 chipset. I'm running an XP Barton 3200+ at 2.33 at 1.675 Vcore with 1GB of this Wintec in dual channel. The reason that I'm running at 2.33 is because I can't get things even remotely stable at any higher speeds. I blue screen or fail to boot at anything above about 2.35. CPU idles at around 43 peaks out at around 49-50. I'm pretty sure that the ceiling I've hit is because of the RAM. I hit an error within a minute on Prime 95 in Blend and Large FFTs (RAM intensive) tests. On the Small FFTs (easy on the RAM) I've gone over 6 hours before I stopped it (at which point the cpu was running at 49). Everest home addition puts the RAM at 3.0-3-3-8, and it benchmarks at 2680 MB/s Read, 927 MB/s Write, and 107.3 Latency, which are actually decent numbers for my chipset/CPU according to the Everst marks (though I'm sure that the modest OC and the DC have something to do with this). My BIOS doesn't allow me to adjust the timings or the multiplier on the RAM, just the voltage which I've raised and lowered a bunch of times with nothing to show for it. Anyway, that's my expereince for what it's worth. I've got some Corsair on the way... we'll see what happens.