I've had problems with the DS inability to hold any OC after a shutdown or restart period. I was running my E6600 @ 3.060 (9 X 340) 4-4-4-12 core temp 36 39 idle
core temp 52 53 load CPU Vcore 1.375
DDR2 = 2.1, PCI-E = 102, Mem mult = 2, +0.1v to MCH,FSB, PCI-E
I ran orthos with these settings for 8 hours the highest the temps got with full load was 54,
should be stable right? After trying to devise a strategy to acheive a 3.2 OC after I come home boot up the system and it's back at default 9 X 266. I ended up flashing the MOBO to F11, disconnected my IDE devices and checked the rails on my PSU and everything checked out.
I then replaced the battery with my 4 year battery from my ASUS P4C800 DLX board and the OC held for 6 hours until the board drained that battery too.
any suggestions on a new board?? Just looking for board that will do a mild OC and that is compatible with Geil DD2 800 memory.
Thanks :beer:
core temp 52 53 load CPU Vcore 1.375
DDR2 = 2.1, PCI-E = 102, Mem mult = 2, +0.1v to MCH,FSB, PCI-E
I ran orthos with these settings for 8 hours the highest the temps got with full load was 54,
should be stable right? After trying to devise a strategy to acheive a 3.2 OC after I come home boot up the system and it's back at default 9 X 266. I ended up flashing the MOBO to F11, disconnected my IDE devices and checked the rails on my PSU and everything checked out.
I then replaced the battery with my 4 year battery from my ASUS P4C800 DLX board and the OC held for 6 hours until the board drained that battery too.
any suggestions on a new board?? Just looking for board that will do a mild OC and that is compatible with Geil DD2 800 memory.
Thanks :beer: