First off, the current setup is:
Full T1
Netopia R5300-T T1 Router
D-Link DI-713+ WAP & Router
Currently most of the clients are plugged into the 8 port hub on the Netopia, and there is another client who is hooked up on the uplinked D-Link router.
As of now all clients are using a static IP.
What I want to setup:
DHCP & NAT on the D-Link so that non-servers can be behind the router for security, and servers can continue to use their public static IPs.
The problem is, when I set it up, it just plain doesn't work. Configuration I setup on the D-Link:
LAN IP: 192.168.0.1
WAN Type: Static
WAN IP Address: (Available Static IP in our block)
WAN Subnet Mask: 255.255.255.224
WAN Gateway: (IP of our Netopia Router)
Primary DNS: (Speakeasy Primary DNS)
Secondary DNS: (Speakeasy Secondary DNS)
DHCP is enabled.
Ok, when I have a client (In this case the client is plugged physically into the Netopia router) renew an IP address that works fine, however, the only IPs they can ping are:
Their local IP
Both the WAN and LAN Ip of the D-Link router
And the 192.168.0.255 broadcast IP
So they can't ping other users on the network or internet. I know it is uplinked fine because the single user plugged into one of the ports on the D-Link has internet access through a static IP.
Any ideas why this doesn't work?
Full T1
Netopia R5300-T T1 Router
D-Link DI-713+ WAP & Router
Currently most of the clients are plugged into the 8 port hub on the Netopia, and there is another client who is hooked up on the uplinked D-Link router.
As of now all clients are using a static IP.
What I want to setup:
DHCP & NAT on the D-Link so that non-servers can be behind the router for security, and servers can continue to use their public static IPs.
The problem is, when I set it up, it just plain doesn't work. Configuration I setup on the D-Link:
LAN IP: 192.168.0.1
WAN Type: Static
WAN IP Address: (Available Static IP in our block)
WAN Subnet Mask: 255.255.255.224
WAN Gateway: (IP of our Netopia Router)
Primary DNS: (Speakeasy Primary DNS)
Secondary DNS: (Speakeasy Secondary DNS)
DHCP is enabled.
Ok, when I have a client (In this case the client is plugged physically into the Netopia router) renew an IP address that works fine, however, the only IPs they can ping are:
Their local IP
Both the WAN and LAN Ip of the D-Link router
And the 192.168.0.255 broadcast IP
So they can't ping other users on the network or internet. I know it is uplinked fine because the single user plugged into one of the ports on the D-Link has internet access through a static IP.
Any ideas why this doesn't work?