Santa Cruz Pinout?

[Dark54555]

Now that I have a case with front audio, has anyone figured out the pinout for the Santa Cruz proprietary panel? I know it matches a dell proprietary connector, and may be the same as a Sound Blaster's connection. I'd like to be able to use my front connections, if I can figure it out.

 

[Zepper]

The last time I checked there were no internal front port conenctions. The pin header on the board is for a daughter card that was never made..

.bh.

 

[Zepper]

Sorry, dupe....

.bh.

 

[Dark54555]

I'm talking about the unlabled white connection, not the unlabled black connection.

I read somewhere it can be connected to Dell front panel audio, and the same connection is on the sound blaster audigy 2 and newer cards.

 

[Zepper]

I think the unlabeled white connector is for the voicemail and speakerphone features of some modems. It is mono (mic) in and mono out.

.bh.

 

[CP5670]

I'm not sure exactly what your connector looks like, but I have the white one seen in this picture on my card. It's labeled J1. These are the pins I'm using: (10 is the one closest to the back panel)

1:
2: Line out left
3: Line out ground
4: Line out right
5:
6: Mic in
7:
8
9:
10: Mic power

The pins are shorter than the equivalent ones on motherboards and the case pin headers don't fit securely at all, but I put some tape over them to make them stay in. I have lately stopped using the front ports though, as I get a bit of buzzing/interference from PCI bus activity when I connect my headphones through them.