Sapphire TriXX with Fury/X over-volt & HBM OC support.

[Silverforce11]

http://asia.dl.sapphiretech.com/archive/gm/drivers/SAPPHIRE_TRIXX_installer_5.2.1.exe

Early reports of users hitting 1175 to 1200mhz with 50-100mV. Very standard for GCN so nothing shocking, besides the power use increase.

I much prefer the under-volt ability on GCN, same performance, reduce power use by heaps.

 

[crisium]

Can you please give some more info besides an exe? Other forum posts maybe?

 

[Elixer]

SAPPHIRE TriXX Utility

Rev up the performance of your AMD Radeon™ or FURY based graphics card with the latest new-look version of SAPPHIRE TriXX. Change settings for the best performance of any compatible graphics card in different applications or games and save up to four sets and easily switch between them.

Enthusiasts can adjust fan speeds, core voltages and clock speeds to tune up performance to the max in your favourite games by overclocking, and save those settings for the next time you play the game. Safe recovery means you will never get stuck in settings you can't change!

Not gaming today? Then save another set of changes with low fan speeds to run super quiet while you are watching a video – or revert to default settings for general purpose computing. Whatever you want to do - TriXX makes it easy.

TriXX not only monitors basic parameters such as fan speed and GPU temperature but also GPU load, voltages and memory performance. TriXX can also create a log file for future analysis, and you can save the current VGA BIOS.

Check back for updates – TriXX is regularly updated to provide support for new releases of graphics cards and GPU families as well as enhancements to the tool.
New features

New look and interface
Now supports over-volting on Radeon R300 series
Now supports HBM memory overclock on FURY cards
Now supports over-volt on FURY cards
Minimise TriXX to task bar

Main Features

Overclock your AMD RADEON™ or FURY based graphics card
GPU Core Clock
GPU Voltage
Video Card Memory Clock
Save your Favourite Settings with up to 4 Profiles.
Adjust your Graphic Card’s Fan Settings with Automatic, Fixed or Custom Fan Speeds
Information Tab with all you need to know about your Graphic Card including GPU, Interface, Memory, Driver Version, BIOS Version, Clocks, Shaders and more…
Multi-GPU support (CrossFireX)
Windows Sidebar Gadget option

http://www.sapphiretech.com/catapage_tech.asp?cataid=291&lang=eng

 

[Tecnoworld]

Very interesting. Is there any guide about which voltages are OK for this GPU?

 

[Madpacket]

About time..

The question now is how does it compete with an overclocked Geforce 980 Ti?

 

[n0x1ous]

FINALLY! My Fury X is getting +100mv tonight and going to pushed as far as she can go

 

[ElFenix]

why do vendor overclocking apps have to look like garbage?

 

[3DVagabond]

why do vendor overclocking apps have to look like garbage?

Huh? IMO, all that matters is functionality.

 

[therealnickdanger]

why do vendor overclocking apps have to look like garbage?

Because dials! SPEEEEEEEEEEEEED!

 

[tg2708]

why do vendor overclocking apps have to look like garbage?

Said the same thing and instantly wished it was designed by apple lol. Alot of windows graphics looks outdated and archaic.

 

[Azix]

The APp looks perfectly fine in those pictures. Its actually clean unlike afterburner. it is simple as well

 

[ElFenix]

Said the same thing and instantly wished it was designed by apple lol. Alot of windows graphics looks outdated and archaic.

I don't need it to be modern and high design, but what's wrong with an interface more like cpu z or something like k10stat? Other than the 5 hp you miss out of from each dial gauge, I mean?

 

[Madpacket]

The UX designers of these overclocking tools need to be rounded up and thrown in an active volcano. It's like they're trolling us on purpose...

 

[n0x1ous]

Well just took things for a spin. Voltage tops out at +75mv in the app so I cranked her all the way up to that and +50% power limit. CTD running firestrike ultra @ 1200mhz.

Completes the benchmark with minimal artifacting @ 1175 mhz......sigh....

I will probably settle on 1150 mhz...........Not too impressive but better than nothing. looks so weak compared to my 980ti stock voltage overclocks though.

 

[Silverforce11]

Well just took things for a spin. Voltage tops out at +75mv in the app so I cranked her all the way up to that and +50% power limit. CTD running firestrike ultra @ 1200mhz.

Completes the benchmark with minimal artifacting @ 1175 mhz......sigh....

I will probably settle on 1150 mhz...........Not too impressive but better than nothing. looks so weak compared to my 980ti stock voltage overclocks though.

How about under-volting, is that possible too?

 

[SimianR]

Well just took things for a spin. Voltage tops out at +75mv in the app so I cranked her all the way up to that and +50% power limit. CTD running firestrike ultra @ 1200mhz.

Completes the benchmark with minimal artifacting @ 1175 mhz......sigh....

I will probably settle on 1150 mhz...........Not too impressive but better than nothing. looks so weak compared to my 980ti stock voltage overclocks though.

Did you overclock the memory as well out of curiosity?

 

[n0x1ous]

How about under-volting, is that possible too?

It is up to -75 but of no interest to me.

Did you overclock the memory as well out of curiosity?

didnt touch the hbm as it seems pointless with so much bandwidth already on tap.

 

[Silverforce11]

It is up to -75 but of no interest to me.



didnt touch the hbm as it seems pointless with so much bandwidth already on tap.

Then you didn't read the TPU guide awhile ago?

Fury X does not scale well with OC without HBM OC to match.

I suspect its not bandwidth related, but rather, timings or latency.

HBM from user reports seem to top out around 570 from 500. With both core and HBM OC, the scaling is perfect.

 

[n0x1ous]

Then you didn't read the TPU guide awhile ago?

Fury X does not scale well with OC without HBM OC to match.

I suspect its not bandwidth related, but rather, timings or latency.

HBM from user reports seem to top out around 570 from 500. With both core and HBM OC, the scaling is perfect.

did not read the TPU guide. I will give it a go on the HBM in that case

 

[gamervivek]

HBM overclocking is kinda necessary for good gains with OC on Fury X.

http://www.hardware.fr/articles/937-26/overclocking-gpu-fiji.html

A 10% improvement over stock will be very good for these chips.

 

[wege12]

I seem to only be able to overvolt by 72 mV.When I try to set it to 75 mV, the setting doesn't stick and automatically goes down to 72 mV. How can I bump this up to 100 mV that people are reporting?

Thanks

 

[n0x1ous]

I seem to only be able to overvolt by 72 mV.When I try to set it to 75 mV, the setting doesn't stick and automatically goes down to 72 mV. How can I bump this up to 100 mV that people are reporting?

Thanks

mine does the same

 

[therealnickdanger]

Overclockers Dream®

C'mon guys, push it to the limit!

 

[railven]

Well just took things for a spin. Voltage tops out at +75mv in the app so I cranked her all the way up to that and +50% power limit. CTD running firestrike ultra @ 1200mhz.

Completes the benchmark with minimal artifacting @ 1175 mhz......sigh....

I will probably settle on 1150 mhz...........Not too impressive but better than nothing. looks so weak compared to my 980ti stock voltage overclocks though.

Any update with OC'd HBM? Have you monitored power consumption?

Once I got the EVGA Hybrid Kit on my 980 Ti, I can hit 1515mhz on core at the stock 1.193v, it's awesome. And power consumption went down which is a nice perk!

 

[wege12]

mine does the same

Did you, or anyone else, find out how to access the full 100mv and make the settings stick?