SB LIVE Platnium 5.1 problem after installing Abit KT7A-RAID Mobo.

[G3DN]

I had a Sblive Platnium 5.1 installed and working great on a P3 933 with a Abit SE6 mobo. I then upgraded to a T-Bird 1.2 and Epox 8kt3a motherboard and it still worked fine. I then upgraded to a Abit KT7A-RAID...the cards works fine except I can't get the sound-in to work. I have a Realmagic Hollywood Plus decoder and run the sound from that card to my SBlive...after installing this new motherboard I get no sound when playing back a DVD movie. I plugged my head phone directly into the output of the decoder to make sure that worked and I got sound. I re-installed the drivers...and I checked for any conflicts..there is none. The only thing I haven't tried yet it pulling the sound card out and putting it on another motherboard to see if the input still works...I wanted to see if anyone on this forum had any other idea's before I did that. I'm running Windows ME and DX8.0a.

 

[bepejet]

I have abit kt7a-raid with 1ghz and sb live!value and Realmagic Hollywood Plus too. I have a audio cable connect with pioneer dvd rom to Realmagic audio in, and from audio out which is in Realmagic connect to Auxiliary. And use digital pin connect from dvd to sb live! value. Every thing works fine. so if you want you might want to try that. Keep in mind you need also change the setting in the Mixer which is the software from creative liveware. Good luck!

 

[kw3i]

were your drivers all installed properly?

 

[Pers]

where did u connect the decoder to in the sound card (video, cd, auxillery)??? After u find that out go and check if the volume is up. That could be the problem...if u are really DUMB (j/k)