Scart to hdmi or hdmi over cat5??

[pg0909]

I have a big house so when i built it (8-9 years ago) i installed the Scion 6000b AV HUB for dirtibuting video and audio from different sources to many Tvs and projector.

The problem is that the hub send only SD signals which was the standard at that time.The Scion uses cat5 and sends video through scart to each device

I dont want to throw away the Scion and buy another model since it does my job but in SD

Now i have 2-3 devices wich can send HD but i receive only SD.

I dont want to throw away the Scion but pair it with other technology so that i will be able to get HD.

1)Can i use two scart to hdmi converters for each device (on both ends) to convert SD to HD?

2)Can i use a centrally located(near the hub) upscaler and change the signal of Scion??

3)Can i use Cat5 over HDMI and do my job??

Which is the best solution in terms of simlicity,cost and compatability with Scion??

Do you have more suggetions??

Thank you very much

 

[sdifox]

I doubt the scion has the bandwidth for hd.

 

[matricks]

HDMI to RJ45 or similar devices are probably your best bet. I have never tested such a device.

You can probably throw the Scion hub out of your plans. If it's designed for SD signals it will not carry a HD signal without causing a significant quality loss. You say it does the job. What is the job? My computer from 10 years ago can do the same job my brand new one does, just very, very slowly.