Setting up network

[ramrod]

COMPUTER A COMPUTER B
AMD 1 gig tbird Intel P233mHz MMX
abit kt7a-raid motherboard Intel 430 TX motherboard
256 mHz pc133 ram 128 SDRAM
plexwriter 12/10/32a cd-rom
pioneer dvd sound blaster 16
soundblaster x-gamer matrox millenium 2mb
ati radeon 64ddr vivo diamond monster II 8mb
win98 se win98 se

Thanks to all those that helped me here, I finally got both of my computers to recognize their nics(linksys lne100tx), so I installed the drivers and rebooted. I hooked up the rj45 cable from computer A to my router(linksys befsr41). Hooked up a second rj45 from computer B to router. After I clicked on network in the control panel to configure tcp/ip.
Under the ip addresses I put 192.168.1.2 for computer A and 192.168.1.3 for computer B. The subnet mask I wrote in 255.255.255.0 for both of them. In the Identification tab next to computer name I wrote computer a for computer A and computer b for computer B. For work group I put Home for both of them. Reboot and I should have a working LAN. Well when I go to network neighborhood, in computer A I see only computer A under entire network. In computer B I only see computer B under entire neigborhood. Can anybody help me and tell me where I went wrong?
P.S. I am running zone alarm on computer A

 

[LuckyTaxi]

check to see if you have enabled "file and printer sharing" under the network setting.

 

[aimn]

try and ping computerb from computera......what happens?

 

[Bglad]

You have to enable file and printer sharing in network neighborhood. Then share the drives for the network by right clicking each drive, choose sharing and follow prompts.