Originally posted by: aldamon
Originally posted by: MustangSVT
how are the o/c functions of this board?
1. ) does it support indepent mhz/voltage control for cpu/memory/pci/agp ?
2.) and what about multiplier control?
3.) wonder if i can o/c my 1600+ (currently 2100+) any further
1.) All yes. No VDD voltage though. Not that you need it with the Ultra 400 chipset. I'm at 211 FSB so far. This board allows memory voltage up to 2.7V and CPU voltage up to 2.0V. I haven't changed the AGP voltage because it's not necessary. This board undervolts on the CPU by about 0.05V though, so "2.0" is really 1.95 - 1.97V.
2.) Yes on the multiplier control.
3.) It depends on what was holding you back before.
Originally posted by: mboy
Originally posted by: vfrjim
anyone know if there is a hacked bios available for this board so that you can unlock XP processors in the bios?
All Nforce 2 boards should allow u to change the multi without doing anything special on XP processors. No bios should be needed.
That is incorrect. Palomino AthlonXPs are locked. You have to unlock them with conductive paint, pin wires or a defogger kit. Only the AthlonMPs, Thoroughbred AthlonXPs and Barton AthlonXPs are unlocked from the factory. If the CPU is unlocked, the nForce2 will have no trouble changing the multiplier. Keep in mind though, some boards will not allow you to go above 12.5 if the processors default mutliplier is not above 12.5. I believe the Shuttle is one of those boards. If you're going for a high FSB, you won't want anything higher than 12.5 anyway.