I bought a via c3 1ghz and put it in my shuttle fv24 and bios detects it as a VIA CYRIX III 231 (77mhz X 3). Its supposed to be 100mhz X 10.
The bios options of the fv24 do you not let you manual change the frequency or voltage its all on auto detect.
The only options for frequency/voltage in the bios are
Enable/Disable Auto
Spread Spectrum
I've tried togglign between the enable and disable and that made no difference.
I also have the latest bios for the board.
At the via site it says that the fv24 is a supported board and also theres a few sites where people have put 1ghz in a shuttle fv24.
Any ideas?
The bios options of the fv24 do you not let you manual change the frequency or voltage its all on auto detect.
The only options for frequency/voltage in the bios are
Enable/Disable Auto
Spread Spectrum
I've tried togglign between the enable and disable and that made no difference.
I also have the latest bios for the board.
At the via site it says that the fv24 is a supported board and also theres a few sites where people have put 1ghz in a shuttle fv24.
Any ideas?