Site to Site VPN

[jenson]

Appreciate some advise here.
I am having a site to site VPN connection between site A and site B.
My objective is to get site A device to reach site B and vice versa. It been configured with success.
Issue is once site B device not pointing to the site B vpn router as gateway it not reachable anymore.
I am not planning to configured any routing on my actual gateway. Any alternative for me to achieve that?Only once device need to reach from Site A to Site B.
I am using Juniper SSG140 on both site A and Site B.

 

[Jamsan]

On the device you actually want to act as your default gateway, add a route for the remote subnet of Site A to point to the VPN router that's establishing the IPSec tunnel. That way, you can have the device at Site B still point to it's normal default gateway, and when it detects traffic destined to the remote site, it will send it to the VPN gateway and then across the tunnel.

 

[jenson]

Hi Jamsan,
Thanks for the reply. I thought about it but I am trying to avoid all posibilites of touching the default gateway configuration. That the reason for this post. Any suggestion like NAT 1 to 1 or routing on the Juniper Site B VPN router.?