Originally posted by: ts3433
The same overclock as usual (probably 2.2-2.4 without increasing VCore, topping out at 2.6-2.7); you just run a divider, which doesn't kill performance here.
See here.Originally posted by: gamerj
Originally posted by: ts3433
The same overclock as usual (probably 2.2-2.4 without increasing VCore, topping out at 2.6-2.7); you just run a divider, which doesn't kill performance here.
Why doesnt that kill performance in this case? ... ? just curious
Originally posted by: ts3433
See here.Originally posted by: gamerj
Originally posted by: ts3433
The same overclock as usual (probably 2.2-2.4 without increasing VCore, topping out at 2.6-2.7); you just run a divider, which doesn't kill performance here.
Why doesnt that kill performance in this case? ... ? just curious
Regs: Seeing as you already have a 3000+, I would have suggested that you overclock your current processor (2.4GHz should be attainable with a Newcastle), but I noticed you have a K8V Deluxe (old VIA K8T800), which can't overclock at all. Try just getting a better board, like the DFI Lanparty.
Originally posted by: ts3433
See here.Originally posted by: gamerj
Originally posted by: ts3433
The same overclock as usual (probably 2.2-2.4 without increasing VCore, topping out at 2.6-2.7); you just run a divider, which doesn't kill performance here.
Why doesnt that kill performance in this case? ... ? just curious
Regs: Seeing as you already have a 3000+, I would have suggested that you overclock your current processor (2.4GHz should be attainable with a Newcastle), but I noticed you have a K8V Deluxe (old VIA K8T800), which can't overclock at all. Try just getting a better board, like the DFI Lanparty.
Originally posted by: FNC Jon
I do belive so, i have the 3000+ (1.8) winchester and i knwo ti can oc easier then the 3500 and you can get the 3000 up to the 3500 and higher perfectly stable.
Anyone think other wise?
Originally posted by: Zebo
depends. 2.4 on stock voltage should come w/o issue but most see 2.6 with help either cooling and/or volts.
Originally posted by: miketheidiot
Originally posted by: Zebo
depends. 2.4 on stock voltage should come w/o issue but most see 2.6 with help either cooling and/or volts.
Mine is having trouble with 2.5 and 1.5 volts I need cooling Goodbye $$$
Originally posted by: daveshel
I have a Winchester 3200 with Mushkin 2-2-2 on an EP-9NDA3J. I tried to run the fsb at 220 instead of 200 and I could not boot. I have yet to try bumping the multiplier.