- Nov 12, 2001
- 20
- 0
- 0
I just built a system with soyo dragon + / xp 1800 / 512 mushkin 2100 ddr / 2X maxtor (quantum) 30 gig / gf3 ti200 / audigy sc. When I boot I get a notice Fast Trak does not detect proper interrupts, please check your PCI IRQ setup and make sure the PCI slot supports Bus Master Operations. When it enters the array setup it says no disk found please check the power and data cable connections. I moved the ide cable to one of the regular ide connections (set one drive as slvae) and bios recognized both, so I've got them cabled and powered correctly. I've got the jumpers set right and the Promise onboard RAID is enabled in the Bios. Do I need to set the IRQ's manually and if so, what does each one need to be assigned to?