SuperPI Contest!!!

[bjc112]

Originally posted by: MADMAX23
Hi!
Mine is 31min 19s, using my actual config/rig and the standard SUPERPI, I'll try the patched version and report mu results with the photos.

I see you are only @ 1.45 volts? You most likely have more than 2.6ghz in that chip, lets see what it can do!

 

[MADMAX23]

Yeah, I will try to get it higher.This config has run Prime95 for 25h 16 min with no errors.It is very stable. I posted a topic in the Motherboards section for further info:
My topic

 

[silky]

My Sempron

 

[Tool]

Originally posted by: Zebo

Ballistix is the shizzle.. no one like it though.. but start comparing your async ballistix to any other 2700Mhz 939 LOL..at least 1 minute faster.

PS would you mind doing a winrar internal bench?:thumbsup:

684 KB/s

 

[MADMAX23]

My results using SUPERPI SSE2:
SUPERPISSE2 Results

 

[bjc112]

2726...

Sneaking in by 2 seconds..

Finally running DDR518

259 @ 3-4-4-8 2T

Ran 14 passes of memtest, going to try for 1T..

 

[GuitarDaddy]

Here's my new SD3700+ My lowest run was a 26m 06s but I didn't take a screeie

26m 29s SuperPI

 

[bjc112]

Originally posted by: GuitarDaddy
Here's my new SD3700+ My lowest run was a 26m 06s but I didn't take a screeie

26m 29s SuperPI

Damn iT!

Ran 7 passes @ 1T

Brought my Sandra memory scores ( which mean nothing ) from 5900 to 7100..

RUnning Again now.. Looking to break 26miN!

 

[bjc112]

2652



Pretty damn happy with that..



Can't touch the SD core, but still pretty good..

 

[MADMAX23]

My newest result: 29m56s

29m56s

 

[bjc112]

Originally posted by: MADMAX23
My newest result: 29m56s

29m56s

Hmmm..

Are you running a 1:1 OC @ DDR 600 and you still are just breaking 30 min?

My 26:52 was @ 3-4-4-8 1T / 260mhz..

 

[MADMAX23]

2T command rate bjc 112...

 

[bjc112]

Originally posted by: MADMAX23
2T command rate bjc 112...

That knocked only about 30 seconds off my time..

I just ran memtest @ 3-3-3-7 1T for 7 passes.. But cannot complete a run of SuperPI

:Q?

Doesn't make sense..

Unless SuperPI is THAT finiky..

 

[bjc112]

26:37

So so close to GuitarD..

3-3-3-7 might have done it.. For some odd reason 3-4-3-7 1T went just fine.. 3-3-3-7 wouldn't even after 7 passes of memtest..

 

[bjc112]

Is the OP banned?

 

[bjc112]

Bump..

And still curious if the OP is banned?@?!

 

[ender11122]

27:21

not bad I guess

 

[bjc112]

Originally posted by: ender11122
27:21

not bad I guess

Not too bad at all..

If I could run Cas 2.5 @ DDR 520 I think I could beat GuitarDaddy!!



Does ANYONE know if the OP was banned? He hasn't logged on in a LONGGGG time..

 

[ender11122]

or he left. start a new thread bjc. I would but I would forget to update it.

 

[boshuter]

Yeah.... I forgot all about this thread, someone should take it over or start a new one.

Here is a little help for the Intel guys..

24.08

P4 571 3.8es @ 4.4ghz
Abit AA8XE (POS board, can't wait to replace it :disgust: )
2X512 PDP PC4200XBLK

 

[Technonut]

boshuter: OT, but have you checked out my reply to your thread over @ Xtreme Systems? If not, go check it out... Here..

Nice time BTW... My patched time still holds @ 23m 42s....

 

[boshuter]

Originally posted by: Technonut
boshuter: OT, but have you checked out my reply to your thread over @ Xtreme Systems? If not, go check it out... Here..

Nice time BTW... My patched time still holds @ 23m 42s....

I hadn't seen that, I'll grab that new cpuz and see what happens. I did find out that if I disable HT in bios the fsb is rock steady, I have 3 cpu's, 571 3.8es, 650 3.4es, and just picked up a 660 3.6es and it does it on all of them. Some say it's the cpu, some say it's the chipset.... man I just don't know, but I do know it kills my oc. I have an 840 es coming tomorrow so I need to buy a new board anyway. I'll let you know if it does the same thing

PS: I may take a stab at that time of yours... the 660 I just got is doing 4.45ghz on default volts so far That's on my crappy water cooling. I didn't get to play with it much because I sold my PDP and bought some OCZ PC5400 Platinum, that may be a mistake, the PDP was pretty good :thumbsup:

 

[Technonut]

PS: I may take a stab at that time of yours... the 660 I just got is doing 4.45ghz on default volts so far That's on my crappy water cooling. I didn't get to play with it much because I sold my PDP and bought some OCZ PC5400 Platinum, that may be a mistake, the PDP was pretty good

Nice OC on water....

I was running @ 4.3GHz when that time was taken.... I am waiting to bust-out my other times when someone tops that... I only consider 24 hour+ dual Prime95 stable times as good personally....

Anyhow, AFAIK there is no issue with your CPU or chipset... It was just a bug in CPU-Z...

 

[boshuter]

Well I got the new version of cpuz..... but I don't have any ram I sold my PDP and am waiting on some new OCZ PC5400EB Platinum, it should be here today and I'll see if the problem is still there. I ordered a new Asus P5WD2 board anyway because the guy I get my cpu's from sent me an 840 3.2es dual core I'm looking forward to seeing your faster times I know I can do some 23sec runs :thumbsup:

 

[coomar]

29:54

http://img287.imageshack.us/my.php?image=firstsub30minutesuperpi7cc.jpg