I assume you don't have the manual, and for some reason can't call the manufacturer to get a copy? I've never heard of the brand, but that's not surprising. Couldn't find much detail through Google, but that's not surprising either; stuff like this doesn't often come up in searches.
For telnet access, I couldn't tell you whether it has a default IP address or not, but you may want to try setting up a single workstation in the 192.168.1.0/24 network with a direct connection to the switch, and try connecting to 192.168.1.1 (or also try 192.168.0.0/24). Those are the usual IP's used for a default, however the switch doesn't necessarily use a default.
The standard console configuration uses 9600bps, 8 data bits, no parity, 1 stop bit. If this was a used switch, it may or may not still be set to the default for this. This is something a CCNA should know, it is a basic thing.
After you manage to either telnet or console into it, you can set the IP address to something that is within the network you're already using rather than the default, so you can telnet again later once it's on your network. That will also open up the SNMP configuration options.
You'll have to figure out the way to configure the switch on your own.