thanks rob. mine operates as you state. lvd on J1, and cds on cn1. not problem. these are the two channels as stated on page 11. however, if you add a se 68 wide hd on cn2 it will work, but will eventually error out or be corrupted. it appears that there are really only two channels. if you operate cn1 and cn2 on my setup it will eventually crash the drive. yes I did use 0,1 and termination combinations. My question has nothing to do with the ultra2 bus. it is isolated. do you have a se ulta wide on cn2 and the legacy devices on cn1. not doubting your word. If you have the time. try putting the lvd on the cn2 connector at se speed. it will not be slower except in burst, unless you have a x15. backup first.