bryanW1995
Lifer
- May 22, 2007
- 11,144
- 32
- 91
Originally posted by: Peav
Originally posted by: Muadib
You might be on to something with the pushpins. I have the Xigmatek HDT-S1283, and it uses those plastic pushpins. I might order that bolt on kit, but if you say it's normal for quads, maybe I won't bother. I really don't want to rip everything out again.
My temps under load topped out at 60C with a room temp of 75F. Core temp says my VID is 1.2125v. I have the vcore set to 1.2725 in the bios. I also have my memory voltage set to 1.90V, with the timings set really low for now.
Another concern I had was the pwm temp. Speedfan had it at 70C under load. Is that normal for the IP35-E?
My PWM goes up to around 70C under load. My Overclock is the same as yours but my Vcore is 1.35V VID is 1.3.
I have noticed the cores on my quad have different temps under load. Cores 0 and 1 around 63C at load but cores 2 and 3 are usually around 3-5C lower. I think its normal and your temps all seem within acceptable limits.
I use a Xp120 with a YS-Tech 120MM 5 Blade fan @ 7v on it.
that seems like a really high pwm temperature. how's your case airflow? have you checked your heatsinks on your motherboard to make sure that they're making good contact?