Originally posted by: loup garou
Originally posted by: BD2003
So I've got a hacked component cable up and running....works great. Just need to fix it up to be a bit more stable.
Like hell I'm waiting weeks or paying over $100 for one.
And I must reiterate that the guy who did the sound for COD3 is an absolute idiot.
What? Huh? Spill the beans, how'd you do it???
Theres where I got the original info, but as you can see, the guy who did it first didnt exactly explain it well. And he's tearing out the original pins...something I highly recommend against.
I gotta go to class now, but here's the gist...I'll post a more full explanation later. Right now I only have the chroma cable attached since the only paper clips I have are too small to stay snug.
First take the grey cover off the composite cable. This is probably the hardest part...keep working at the little clips in the front until you can push the wire through. Then get that little black plastic clip out of the way. Also get rid of that little metal thing that bundles the wires. Separate them so you have room to work.
Take one of the black wires from the composite cable, and strip it a bit, give yourself an inch or so to work with...it'll be the ground for the rest of the cables.
Grab a spare set of component cables or RCA cables...for 480p, it won't really matter. Cut them off at one end. For each cable, separate the inner insulated wire (positive) from the outer loose wire (ground).
Strip some off the ends of each. For all three of the ground wires from your new cables, splice/solder them into the ground that you stripped away from the nintendo composite cable. Cover this up with tape or heatshrink.
Then, for each of the three new positive component wires, splice solder them onto a MEDIUM unpainted paper clip...you need about an inch of it. If it's too small, it won't fit snug, and it just wont work right.
Connect the shell of the cable to the Wii. The paper clips won't stay in if its not already connected, and if you pull it out, everything will fall apart. Stick the paper clips into the proper pins - look at the pinouts for Y Pb and Pr to get it right. THEN, last but certainly not least of all, take another paper clip, and connect pins 8 and 10 to each other...just jumper them...if you don't do this, you won't be able to select progressive scan.
Since the Y cable is just luminance, if you're doing it right, just connecting that cable should give you a black and white 480i screen in component. Once you've got that figured out, just do the rest the same way.
And voila....progressive scan component video for free.
As long as you dont cut, pull or otherwise fvck up the original wires and pins, and you know what you're doing, you shouldnt harm the original cable. But of course, I take absolutely ZERO responsibility if the Wii blows up in your face, or you otherwise end up crying cause now you can't play your Wii and there are no cables to be found.