Santyclaws
Junior Member
- Mar 5, 2007
- 18
- 0
- 0
That is at a room temp of 75F. Whats confusing is that the program Core Temp reports 60C at full load vs. Speedfan 45C at full load.
Originally posted by: CikaNovo
It's Core Temp 0.95,right?0.95 shows correct temp values,because at room temp of 24C(75F) there is no way core temps can stay as low as 45C.What cpu temp asus probe II measures?
Originally posted by: CikaNovo
Probe II CPU Temp is the same one as Temp 1 in SpeedFan,but CoreTemp doesn't read or display that temp.You'll have to give me Temp1,Core 0 and Core 1 temps in SpeedFan,than I can tell if your temps are ok.
Originally posted by: sgar
Originally posted by: CikaNovo
Probe II CPU Temp is the same one as Temp 1 in SpeedFan,but CoreTemp doesn't read or display that temp.You'll have to give me Temp1,Core 0 and Core 1 temps in SpeedFan,than I can tell if your temps are ok.
@idle
Temp1 36C
Core 0 33-35C
Core 1 33-35C
Temp1 40C (maybe mobo?)
@load
Temp1 38-40C
Core 0 44-46C
Core 1 44-46C
Temp1 40C (maybe mobo?)
Q-Fan enabled on CPU and case fans
Strangely enogh the MB temps are always araund 40C
Originally posted by: dlxmax
Your problem is your cooler, "Core2Duo E4300 @ 3.0, Zalman 7000B-AlCu". I had a Zalman 7000cu and gave it a shot, but that old technology was just not efficient at getting the heat away from a hot chip like a C2D. Get something better with heatpipes. We have the same chip, look at my sig.Originally posted by: CikaNovo
What voltages are you people using to get over 3.2 ghz on your cpu's?I need to pump 1.525 to my e4300 to be stable at that speed,and that's just to much.Cooling the northbridge gets me to 1450 FSB(3.26 ghz),but that requires 1.5v,and above 1520 FSB I can't even boot to Windows no matter what multiplier I use.Could better CPU cooler (Ninja perhaps) be of any help with this issue,and how much does thermalright's hr-05 for the northbridge helps with overclocking?
Of course, you have to ask yourself if the price of a new cooler is worth 100mhz. IMHO, it's not.
Also, again E4300 owners, to the best of my knowlege, only the LATEST version of Core Temp is correctly reporting core temps. http://www.thecoolest.zerobrains.com/CoreTemp/
Originally posted by: ismellburning
Hi Guys,
Not sure if I should start a new thread, or ask for advice in here.
I have a new P5n-e system, and generally it is working great, but I've had a few problems with it.
This is my system:
ASUS p5n-e
2GB G.Skill 800Mhz DDR2 Ram
C2D 6600 + stock fan
Corsair 520W PSU
Leadtek 8800GTS 640MB
I'm not overclocking anything and checking the temps in Coretemp the motherboard does not go above 43C and the CPU is idling at about 31C and I've not seen it higher than 40C under load.
None of my problems are major, just annoying, but any help appreciated.
1) I've noticed when I turn on the computer there is a pause(black screen) of about 10 seconds, then post info comes up. Is this normal?
2) Sometimes when loading windows, the desktop appears, but it then hangs (mouse appears, but no taskbar or icons) for about 5 minutes, then suddenly continues to load.
3) I get blue screens when using azereus(sometimes after 5mins, sometimes after 5 hours) - I have run memtest from a boot CD for 30 mins and no problems found. I only seem to get these crashes when using azereus. I can play CSS for hours with no problem.
Currently I am suspecting dodgey drivers rather than hardware.
TIA
Originally posted by: Zip
two quick q's...
is ncq enabled by default on this board? i cant find the setting anywhere and my hdd definately supports it.
also, has anyone got a link to the pencil mod to help the vdroop? cheers
Originally posted by: Tuvoc
Can I ask a dumb question ?
What is the easy way to remove the battery on this board ? On every other board I've had, you just use a pen to press in a clip within the circular fitting, and the battery pops out. That procedure doesn't seem to work - I literally have to get underneath the battery and force it out, risking breaking the battery housing at the same time. Such that I won't remove it ever again, unless someone lets me know any special trick with it...