Anyone interested in a web page to control Wink devices(light bulbs, locks, and thermostat)?
Here's my first attempt: https://www.dropbox.com/s/grxxr9cv3e5m662/WinkPost.zip?dl=0
Modify the fillBody function in wink.js to enter your ID/Password.
I could only write for devices I have since I don't have the data for others, primarily the desired_state field. Wink is a bit weird in that when you look at the data for various products, it doesn't seem to have any hard a fast rules(while data objects start with the ID, trippers don't)there is no "case" in wink.js for receptacles so you get no associated graphic and you can't control them
Maybe. The main goal was to control device from a web page. Also sensors have some very strange data formats.Nice work! Any plans on adding sensor status, etc?
I tried to add a Aeon Labs Minimote using the manual Z-wave process. It added an "unknown device" entry under my hub. I want to remove it.
I've tried clicking on the entry, and then clicking on "remove failed node". I've also tried pressing "-" device button on the remote, and then "remove failed node". And i've tried putting the hub into exclusion mode and then pressing the "-" device button on the remote. Nothing has worked.
Does anyone know how to remove the "unknown device" entry under the hub?
Thanks.
The iris ones at lowes are only $20. If they can get these devices so cheap then home depot needs to match it with their own.Has anyone tried and generic z wave or zigbee door sensors with wink? I have 2 trippers and am completely unimpressed with the battery life. I have had them for 2 weeks and have already had one die and the other is near dead. Not very good for an item sold as lasting 1 year on a battery. One sensor was a little far away from hub at about 50' and the other is 20'
That stuff looks like the iris stuff at lowesAlso I posted a FB video showing the new switch working with my tablet. A friend posted back that she works for this company. Anyone know about them?
http://www.centralite.com/
That stuff looks like the iris stuff at lowes
Any videos on how to work the tasker thing? I just keep getting no access token was granted
Double check the four fields in OAuth(userID, password, winkID, and wink Secret). One of them is wrong. UserID and password are the same one's you use to log into the wink app. You can check the wink ID and secret over in the comments for OAuth at wink's api site.Any videos on how to work the tasker thing? I just keep getting no access token was granted
Also I posted a FB video showing the new switch working with my tablet. A friend posted back that she works for this company. Anyone know about them?
http://www.centralite.com/
Any videos on how to work the tasker thing? I just keep getting no access token was granted
It just wasnt working. It now doesnt give me that error. But when i do a command via google. The black box pops up says possible command. But nothing ever happens. I habe no idea how to troubleshoot it because i cant find any info on it.Make sure you're using your full email address, not just a username.
It definitely works for me. The one thing that I had to as I was scrolling the tasks steps, I mistakenly reordered the steps instead of scrolling. In tasker if you use your finger in the right side it moves the task/step to a different order. If you use your finger on the left side then it scrolls through the tasks/steps. Reording anything in the tasks this will cause it not to work. I mistakenly did this and not knowing how to undo it. So I deleted the project and reimported it and being careful how I scroll. I put it my email wink address and password and was able to get devices from api and do voice control. Hope this helps.It just wasnt working. It now doesnt give me that error. But when i do a command via google. The black box pops up says possible command. But nothing ever happens. I habe no idea how to troubleshoot it because i cant find any info on it.
Anyone test to see if you can get this to work with wink? http://www.harborfreight.com/wireless-driveway-alert-system-93068.html