I keep fretting and obsessing over cpu temps that I know are inaccurate.
MSI board. So it underreads by 10-15.
PAL 6035. Sanded down with 1500 grit.
Chasis temp reads 21C
Delta fan...idle 31C
Sanyo fan...idle 34C
ARRRRRRRGH!
I know there are many factors involved. Its winter ... room temp is about 63.8F (dont know what that is in C)
Should I stick with the sanyo? or is that really not doing the job?
From past experience the load temps are greater between the 2 fans by almost 4 C. And will moving up to an Antec 830 make a difference from the 282 case Im using now (120mmm intake...80mm exhaust plus antec cyclone pci blower plus Hard drive cooler in front).
I am embarrased by this post.
MSI board. So it underreads by 10-15.
PAL 6035. Sanded down with 1500 grit.
Chasis temp reads 21C
Delta fan...idle 31C
Sanyo fan...idle 34C
ARRRRRRRGH!
I know there are many factors involved. Its winter ... room temp is about 63.8F (dont know what that is in C)
Should I stick with the sanyo? or is that really not doing the job?
From past experience the load temps are greater between the 2 fans by almost 4 C. And will moving up to an Antec 830 make a difference from the 282 case Im using now (120mmm intake...80mm exhaust plus antec cyclone pci blower plus Hard drive cooler in front).
I am embarrased by this post.