Threadripper BUILDERS thread

Page 18 - Seeking answers? Join the AnandTech community: where nearly half-a-million members share solutions and discuss the latest tech.
Toggle sidebar Toggle sidebar
K

krumme

Diamond Member
Oct 9, 2009
5,956
1,595
136
Congrats man.
That samsung b ram latency and perf...
3600x4 c16 on ryzen that i didnt expect.
It expensive but alliviate most of the disadvantages with this platform. Way to go it seems.

The cpu actually looks cheap. Lol. First 1000 usd ever to do so as i can recall.
I like the perf, temp and power at stock on a cheap cooler. But you have to put aside for the ram. No doubt.
 

moonbogg

Lifer
Jan 8, 2011
10,637
3,095
136
Mark, Holy balls man, that thing flies. Good lord that's some ridiculous power, LOL! Congrats!
 
M

MarkPost

Senior member
Mar 1, 2017
239
345
136
Fir said:
It's set to AUTO but runs around 1.34 and up to 1.41 under load. Have not run a real stability test on it. TBH, don't trust the cooler for long runs! The plate isn't covering the IHS and dies completely.

I did try 1.3 vcore manual and it locked up in the middle of cinebench testing.
That's going to be a trend with so many cores on a relatively small package.
Wait until Intel releases their 18 core part! The only way that's going to o/c past 4GHz stable under load is with a really good block and probably need sub ambient coolant!

Even stock these are nothing to sneeze at just on brute force alone.
Click to expand...
I guess for a 4.0-4.1 OC you need 1.35-1.36, like Mark.
Which cooler are you using?
 
M

MarkPost

Senior member
Mar 1, 2017
239
345
136
Markfw said:
Before I go to bed, I would like to make a point to all reading this, With a "good" hardware config(3600 ram), and a $120 AIO cooler I now appear to have beaten (per anj2208) "a 7900x @ 5.982GHz on LN2 (3333) from hwbot." with my 3408 score. If this is correct, even I am astounded, especially since I did this on a 10 minute OC. (4.1 ghz @ 1,35 vcore).

Please reply with any CONTRUCTIVE comments.
Click to expand...
Really great! Ryzen usually needs +1.4v for 4.0. it seems these TR are indeed Zen golden picks
 
Reactions: lightmanek
F

Fir

Senior member
Jan 15, 2010
484
194
116
MarkPost said:
I guess for a 4.0-4.1 OC you need 1.35-1.36, like Mark.
Which cooler are you using?
Click to expand...

My results have been similar to others. I don't think the spread is as great as Intel when it comes to the silicon lottery. What I'm thinking here is it's boiling down to how effective our coolers are. (pun certainly not intended!)

I'm using the Thermaltake Riing RGB 360 AIO. It has decent radiator area to handle TDP of this cpu. However, the coldplate is machined for a completely different platform. It's quite concave. Even with liberal application of the best TIM, it's simply not effective to adequately cool this processor with 16 cores. Some are going to heat excessively resulting in lockups at 4GHz with a sustained load. Yes it will pass Cinebench tests. But I don't run that all day with my computer! LOL

When running the realbench 2.54 suite (which has a great stability test btw), even the benchmark at the end that includes heavy multi tasking will freeze the system. Usually when the OC is too high a BSOD occurs. It simply freezes and needs a reset. The reset button always works unlike a hard lock requiring a 5 second push of the power button or a power supply disconnect. That is why I suspect it's got a core or two getting way too hot.

Either wait for a real water block, the Cooler Master AIO that was just announced or even the Noctua air solution that has a full coverage cold plate.

TBH, at higher levels of OC approaching the limit of the CPU, with 16 cores and TDPs way over 250+ watts, liquid is going to be needed for those that use their systems to crunch/fold or render projects that take all night to run.

For that reason alone, I plan to run at stock until a suitable cooler is hitched to this thing!

I broke 3400cb with 4GHz using the 4GHz OC profile in the Zenith BIOS. But for long term use with the current cooling solution it isn't stable.

As a hardcore overclocker, running stock seems to be a sin, but trust me at stock if you use this CPU as it was intended, you're still flying high above the others while consuming less energy.

Finally I must say the last time I spent $1k for an AMD chip was in 2005 for an FX60. I still have that CPU and board. At the time it was great compared to Intel's Netburst. Maybe this will have them scrambling for the next Conroe to dethrone them again. I suspect it's going to take a while. It's nice to have competition again!
 
Reactions: MangoX, richierich1212, Space Tyrant and 3 others

ub4ty

Senior member
Jun 21, 2017
749
898
96
Threadripper's Noctua air cooler made an appearance :

LOL, I love Steve but he really needs just a tad more polish on his video.. He just threw shit together on the board and didn't even give mention to the Noctua. It's not even listed on their site. I bumped into it by mistake. Steve ! Give the Noctua cooler a 5min video man... you're the only one w/ it. LMFAO
 
Reactions: Drazick
M

MarkPost

Senior member
Mar 1, 2017
239
345
136
Fir said:
My results have been similar to others. I don't think the spread is as great as Intel when it comes to the silicon lottery. What I'm thinking here is it's boiling down to how effective our coolers are. (pun certainly not intended!)

I'm using the Thermaltake Riing RGB 360 AIO. It has decent radiator area to handle TDP of this cpu. However, the coldplate is machined for a completely different platform. It's quite concave. Even with liberal application of the best TIM, it's simply not effective to adequately cool this processor with 16 cores. Some are going to heat excessively resulting in lockups at 4GHz with a sustained load. Yes it will pass Cinebench tests. But I don't run that all day with my computer! LOL

When running the realbench 2.54 suite (which has a great stability test btw), even the benchmark at the end that includes heavy multi tasking will freeze the system. Usually when the OC is too high a BSOD occurs. It simply freezes and needs a reset. The reset button always works unlike a hard lock requiring a 5 second push of the power button or a power supply disconnect. That is why I suspect it's got a core or two getting way too hot.

Either wait for a real water block, the Cooler Master AIO that was just announced or even the Noctua air solution that has a full coverage cold plate.

TBH, at higher levels of OC approaching the limit of the CPU, with 16 cores and TDPs way over 250+ watts, liquid is going to be needed for those that use their systems to crunch/fold or render projects that take all night to run.

For that reason alone, I plan to run at stock until a suitable cooler is hitched to this thing!

I broke 3400cb with 4GHz using the 4GHz OC profile in the Zenith BIOS. But for long term use with the current cooling solution it isn't stable.

As a hardcore overclocker, running stock seems to be a sin, but trust me at stock if you use this CPU as it was intended, you're still flying high above the others while consuming less energy.

Finally I must say the last time I spent $1k for an AMD chip was in 2005 for an FX60. I still have that CPU and board. At the time it was great compared to Intel's Netburst. Maybe this will have them scrambling for the next Conroe to dethrone them again. I suspect it's going to take a while. It's nice to have competition again!
Click to expand...
yeah, in MT tasks this thing is the king right now.

About coolers, Kyle Bennett (HardOCP) tested the same AIO, and he needed to mating the coldplate to obtain better cooling results https://www.hardocp.com/article/2017/08/05/amd_ryzen_threadripper_coldplate_mounting_mating/

Fortunately, as you say, some TR specific coolers are already being announced. Aside the ones you mentioned, EK is now selling their TR water block https://www.ekwb.com/shop/
Enermax has launched their AIO solution too: http://www.enermax.com/home.php?fn=eng/product_a1&lv0=109&lv1=118
 

ub4ty

Senior member
Jun 21, 2017
749
898
96
Markfw said:
First benchmark@first overclock@4.0 ghz


Edit: Ouch overclocking from 3.6 tp 4.0@1.3 vcore put power from 680 to 900 watts !!! I may go back to stock

That is with both 1080TI's doing F@H@100% and 79c, taking vcore down

Edit 2: 1.25 vcore still stable, and 68c instead of 78c
Click to expand...

GG, returning 850 and going to 1000W PSU. This is the kind of on the ground info i was hoping for.
 
Reactions: Drazick
M

MarkPost

Senior member
Mar 1, 2017
239
345
136
ub4ty said:
Threadripper's Noctua air cooler made an appearance :

LOL, I love Steve but he really needs just a tad more polish on his video.. He just threw shit together on the board and didn't even give mention to the Noctua. It's not even listed on their site. I bumped into it by mistake. Steve ! Give the Noctua cooler a 5min video man... you're the only one w/ it. LMFAO
Click to expand...
lets hope he does a review soon! I think it will perform well, as usual with Noctua coolers
 
F

Fir

Senior member
Jan 15, 2010
484
194
116
MarkPost said:
yeah, in MT tasks this thing is the king right now.

About coolers, Kyle Bennett (HardOCP) tested the same AIO, and he needed to mating the coldplate to obtain better cooling results https://www.hardocp.com/article/2017/08/05/amd_ryzen_threadripper_coldplate_mounting_mating/

Fortunately, as you say, some TR specific coolers are already being announced. Aside the ones you mentioned, EK is now selling their TR water block https://www.ekwb.com/shop/
Enermax has launched their AIO solution too: http://www.enermax.com/home.php?fn=eng/product_a1&lv0=109&lv1=118
Click to expand...

Yes I believe he lapped it for better fitment.
I like the EK block but I wish they had a full copper offering.
I'm still reluctant to try nickel as I was burned in the past with flaking plating.
However if I'm going to be stuck with nickel, might as well go full nickel upper and lower!
The supremes looked outstanding on my SR-2 system but I wound up replacing them with full copper due to corrosion issues due to Edy's faulty nickel plating.

It will be interesting to see how well it does with a proper liquid cooled solution!
 

ub4ty

Senior member
Jun 21, 2017
749
898
96
MarkPost said:
do you have two 1080ti too? that consumption is with both cards running at full load
Click to expand...
Yeah, i'll likely have cards with a similar TDP (accounting for 250W a pop max). That's (2x250W) 500W on vidya alone. Then we circle back to threadripper and we account for 3600 RAM which is going to suck down +13-20W extra for ram. I have seen a properly OC'd threadripper suck 300W @4ghz across all cores on just the CPU package total when OC'd.

So, now.. Just on RAM/CPU/Vidya i'm @ 800 (500+300) Watts. Doesn't feel comfy having 50 watts of headroom (in case of 850w) for any other powered devices and also I have 2 more PCI-E slots that are empty. Disregarding the PCI-E slots, i'm simply at 800Watts easy just as you punched to 900Watts with ease. I'm hitting the limits of my PSU and I haven't even begun with a medium level build. Also, I have no clue what video cards might hit next year... So, i'm initiating a return on my 850 and buying a 1000. I wouldn't worry a single bit with a 1000W because there's a comfy amount of headroom.

I can't find a single review that pushed the video cards at the same time as the CPU and took down the power consumption. You did and it solidified that my fears were true.
 
Last edited:
Reactions: Drazick
M

MarkPost

Senior member
Mar 1, 2017
239
345
136
ub4ty said:
Yeah, i'll likely have cards with a similar TDP (accounting for 250W a pop max). That's (2x250W) 500W on vidya alone. Then we circle back to threadripper and we account for 3600 RAM which is going to suck down +13-20W extra for ram. I have seen a properly OC'd threadripper suck 300W @4ghz across all cores on just the CPU package total when OC'd.

So, now.. Just on RAM/CPU/Vidya i'm @ 800 (500+300) Watts. Doesn't feel comfy having 50 watts of headroom (in case of 850w) for any other powered devices and also I have 2 more PCI-E slots that are empty. Disregarding the PCI-E slots, i'm simply at 800Watts easy just as you punched to 900Watts with ease. I'm hitting the limits of my PSU and I haven't even begun with a medium level build. Also, I have no clue what video cards might hit next year... So, i'm initiating a return on my 850 and buying a 1000. I wouldn't worry a single bit with a 1000W because there's a comfy amount of headroom.

I can't find a single review that pushed the video cards at the same time as the CPU and took down the power consumption. You did and it solidified that my fears were true.
Click to expand...
well, then yeah, a 1000w PSU is fine for all that power
 
D

dnavas

Senior member
Feb 25, 2017
355
190
116
MarkPost said:
Enermax has launched their AIO solution too: http://www.enermax.com/home.php?fn=eng/product_a1&lv0=109&lv1=118
Click to expand...

It's a shame that doesn't come in a 280mm size. The 360mm is nice, but a 280 might be easier to swing.

Markfw -- would be interesting to know how much the push-pull helps (as opposed to just one or the other) and also to what degree the 360 helps (vs just a 240 -- while not perfect, presumably you could just remove the last third of your fans). Going big out of the gate is definitely the way to start, but I'd love to know where the sweet spot is.
 

EXCellR8

Diamond Member
Sep 1, 2010
3,982
839
136
crazy performance... I'm just glad this gives much less incentive to buy SKL-X

AMD is trashing Intel for the time being... too bad we can't say the same with Vega/NVIDIA
 
Reactions: Drazick

Markfw

Moderator Emeritus, Elite Member
May 16, 2002
25,761
14,786
136
MarkPost said:
Mark, can you run the Handbrake encoding test? http://www.portvapes.co.uk/?id=Latest-exam-1Z0-876-Dumps&exid=threads/benchmark-your-computer-with-handbrake-1-01-and-x265.2497224/

Some reviewers state Handbrake doesnt scale well with multiple cores, but its strange, because x264 or x265 are heavily multithreaded

It would be nice if you try 1.0.1 version, and the latest too, 1.0.7
Click to expand...
Does 44 seconds sound right ?

Temp Dir: C:\Users\markf\AppData\Local\Temp\
Install Dir: C:\Program Files\HandBrake
Data Dir: C:\Users\markf\AppData\Roaming\HandBrake Team\HandBrake\1.0.1.0

-------------------------------------------


# Starting Encode ...

[09:52:05] hb_init: starting libhb thread
[09:52:05] 1 job(s) to process
[09:52:05] json job:
{
"Audio": {
"AudioList": [
{
"Bitrate": 160,
"DRC": 0.0,
"Encoder": 65536,
"Gain": 0.0,
"Mixdown": 6,
"NormalizeMixLevel": false,
"Samplerate": 0,
"Track": 0,
"DitherMethod": 0
}
],
"CopyMask": [
1073807360,
1073743872,
1074003968,
1073750016,
1090519040,
1074790400,
1074266112,
1107296256
],
"FallbackEncoder": 2048
},
"Destination": {
"ChapterList": [
{
"Name": "00:00:00.000"
}
],
"ChapterMarkers": true,
"File": "C:\\HandBrakeCLI-1.0.1-win-x86_64 (1)\\test_elis.mp4",
"Mp4Options": {
"IpodAtom": false,
"Mp4Optimize": false
},
"Mux": 131072
},
"Filters": {
"FilterList": [
{
"ID": 4,
"Settings": {
"mode": "7"
}
},
{
"ID": 3,
"Settings": {
"block-height": "16",
"block-thresh": "40",
"block-width": "16",
"filter-mode": "2",
"mode": "3",
"motion-thresh": "1",
"spatial-metric": "2",
"spatial-thresh": "1"
}
},
{
"ID": 11,
"Settings": {
"crop-bottom": "0",
"crop-left": "0",
"crop-right": "0",
"crop-top": "0",
"height": "1080",
"width": "1920"
}
},
{
"ID": 6,
"Settings": {
"mode": "2",
"rate": "27000000/900000"
}
}
]
},
"PAR": {
"Num": 1080,
"Den": 803
},
"Metadata": {},
"SequenceID": 0,
"Source": {
"Angle": 1,
"Range": {
"Type": "chapter",
"Start": 1,
"End": 1
},
"Title": 1,
"Path": "C:\\download\\sample-Elysium.2013.2160p.mkv"
},
"Subtitle": {
"Search": {
"Burn": true,
"Default": false,
"Enable": true,
"Forced": false
},
"SubtitleList": []
},
"Video": {
"Encoder": 65536,
"Level": "4.0",
"TwoPass": false,
"Turbo": false,
"ColorMatrixCode": 0,
"Options": "",
"Preset": "fast",
"Profile": "main",
"Quality": 22.0,
"OpenCL": false,
"HWDecode": false,
"QSV": {
"Decode": false,
"AsyncDepth": 0
}
}
}
[09:52:05] CPU:
[09:52:05] - logical processor count: 32
[09:52:05] OpenCL device #1: NVIDIA Corporation GeForce GTX 1080 Ti
[09:52:05] - OpenCL version: 1.2 CUDA
[09:52:05] - driver version: 385.28
[09:52:05] - device type: GPU
[09:52:05] - supported: no
[09:52:05] OpenCL device #2: NVIDIA Corporation GeForce GTX 1080 Ti
[09:52:05] - OpenCL version: 1.2 CUDA
[09:52:05] - driver version: 385.28
[09:52:05] - device type: GPU
[09:52:05] - supported: no
[09:52:05] Intel Quick Sync Video support: no
[09:52:05] hb_scan: path=C:\download\sample-Elysium.2013.2160p.mkv, title_index=1
udfread ERROR: ECMA 167 Volume Recognition failed
src/libbluray/disc/disc.c:274: failed opening UDF image C:\download\sample-Elysium.2013.2160p.mkv
src/libbluray/disc/disc.c:352: error opening file BDMV\index.bdmv
src/libbluray/disc/disc.c:352: error opening file BDMV\BACKUP\index.bdmv
[09:52:05] bd: not a bd - trying as a stream/file instead
libdvdnav: Using dvdnav version 5.0.1
libdvdread: Encrypted DVD support unavailable.
libdvdreadVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.IFO failed
libdvdreadVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.BUP failed
libdvdread: Can't open file VIDEO_TS.IFO.
libdvdnav: vm: failed to read VIDEO_TS.IFO
[09:52:05] dvd: not a dvd - trying as a stream/file instead
Input #0, matroska,webm, from 'C:\download\sample-Elysium.2013.2160p.mkv':
Metadata:
title : Elysium (2013)
Duration: 00:01:02.73, start: 0.000000, bitrate: N/A
Chapter #0:0: start 0.000000, end 62.730000
Metadata:
title : 00:00:00.000
Stream #0:0(eng): Video: hevc (Main 10)
yuv420p10le, tv, 3840x1606, PAR 1:1 DAR 1920:803
23.98 fps, 1k tbn (default)
Metadata:
title : Elysium (2013) - Release for ULTRAHDCLUB
BPS : 51036975
BPS-eng : 51036975
DURATION : 00:01:02.604000000
DURATION-eng : 00:01:02.604000000
NUMBER_OF_FRAMES: 1501
NUMBER_OF_FRAMES-eng: 1501
NUMBER_OF_BYTES : 399389852
NUMBER_OF_BYTES-eng: 399389852
_STATISTICS_WRITING_APP: mkvmerge v8.7.0 ('All of the above') 64bit
_STATISTICS_WRITING_APP-eng: mkvmerge v8.7.0 ('All of the above') 64bit
_STATISTICS_WRITING_DATE_UTC: 2016-01-05 22:30:41
_STATISTICS_WRITING_DATE_UTC-eng: 2016-01-05 22:30:41
_STATISTICS_TAGS: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES
_STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES
Stream #0:1(eng): Audio: dts (DTS-HD MA)
48000 Hz, 5.1, fltp, 1536 kb/s (default)
Metadata:
title : DTS-HD MA 7.1 - Blu-ray CEE
BPS : 2706639
BPS-eng : 2706639
DURATION : 00:01:02.561000000
DURATION-eng : 00:01:02.561000000
NUMBER_OF_FRAMES: 5865
NUMBER_OF_FRAMES-eng: 5865
NUMBER_OF_BYTES : 21166260
NUMBER_OF_BYTES-eng: 21166260
_STATISTICS_WRITING_APP: mkvmerge v8.7.0 ('All of the above') 64bit
_STATISTICS_WRITING_APP-eng: mkvmerge v8.7.0 ('All of the above') 64bit
_STATISTICS_WRITING_DATE_UTC: 2016-01-05 22:30:41
_STATISTICS_WRITING_DATE_UTC-eng: 2016-01-05 22:30:41
_STATISTICS_TAGS: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES
_STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES
[09:52:05] scan: decoding previews for title 1
[09:52:05] scan: audio 0x1: dca, rate=48000Hz, bitrate=1536000 English (DTS-HD MA) (5.1 ch)
[09:52:14] scan: 10 previews, 3840x1606, 23.976 fps, autocrop = 0/0/0/0, aspect 2.39:1, PAR 1:1
[09:52:14] libhb: scan thread found 1 valid title(s)
[09:52:14] Skipping subtitle scan. No suitable subtitle tracks.
[09:52:14] starting job
[09:52:14] decomb filter thread started for segment 0
[09:52:14] decomb filter thread started for segment 8
[09:52:14] decomb filter thread started for segment 2
[09:52:14] decomb filter thread started for segment 3
[09:52:14] decomb filter thread started for segment 6
[09:52:14] decomb filter thread started for segment 4
[09:52:14] decomb filter thread started for segment 5
[09:52:14] decomb filter thread started for segment 7
[09:52:14] decomb filter thread started for segment 1
[09:52:14] decomb filter thread started for segment 9
[09:52:14] decomb filter thread started for segment 10
[09:52:14] decomb check thread started for segment 9
[09:52:14] decomb filter thread started for segment 12
[09:52:14] decomb check thread started for segment 12
[09:52:14] decomb filter thread started for segment 14
[09:52:14] decomb filter thread started for segment 15
[09:52:14] decomb filter thread started for segment 16
[09:52:14] decomb filter thread started for segment 17
[09:52:14] decomb check thread started for segment 22
[09:52:14] decomb check thread started for segment 24
[09:52:14] decomb check thread started for segment 25
[09:52:14] decomb filter thread started for segment 21
[09:52:14] decomb filter thread started for segment 22
[09:52:14] decomb filter thread started for segment 23
[09:52:14] decomb filter thread started for segment 24
[09:52:14] decomb filter thread started for segment 25
[09:52:14] decomb filter thread started for segment 26
[09:52:14] decomb filter thread started for segment 27
[09:52:14] decomb filter thread started for segment 28
[09:52:14] mask filter thread started for segment 9
[09:52:14] decomb filter thread started for segment 30
[09:52:14] decomb filter thread started for segment 31
[09:52:14] mask filter thread started for segment 17
[09:52:14] decomb check thread started for segment 1
[09:52:14] decomb check thread started for segment 2
[09:52:14] decomb check thread started for segment 3
[09:52:14] decomb check thread started for segment 4
[09:52:14] decomb check thread started for segment 5
[09:52:14] decomb check thread started for segment 6
[09:52:14] decomb check thread started for segment 7
[09:52:14] decomb check thread started for segment 8
[09:52:14] decomb filter thread started for segment 11
[09:52:14] decomb check thread started for segment 10
[09:52:14] decomb check thread started for segment 11
[09:52:14] decomb filter thread started for segment 13
[09:52:14] decomb check thread started for segment 13
[09:52:14] decomb check thread started for segment 14
[09:52:14] mask erode thread started for segment 13
[09:52:14] decomb check thread started for segment 16
[09:52:14] mask erode thread started for segment 18
[09:52:14] decomb check thread started for segment 18
[09:52:14] decomb check thread started for segment 19
[09:52:14] decomb check thread started for segment 20
[09:52:14] decomb check thread started for segment 21
[09:52:14] decomb filter thread started for segment 18
[09:52:14] decomb check thread started for segment 23
[09:52:14] mask dilate thread started for segment 1
[09:52:14] decomb filter thread started for segment 20
[09:52:14] decomb check thread started for segment 26
[09:52:14] decomb check thread started for segment 27
[09:52:14] mask dilate thread started for segment 11
[09:52:14] mask dilate thread started for segment 12
[09:52:14] mask dilate thread started for segment 14
[09:52:14] decomb check thread started for segment 31
[09:52:14] mask filter thread started for segment 0
[09:52:14] mask filter thread started for segment 1
[09:52:14] mask dilate thread started for segment 22
[09:52:14] mask filter thread started for segment 3
[09:52:14] mask filter thread started for segment 4
[09:52:14] mask filter thread started for segment 5
[09:52:14] mask filter thread started for segment 6
[09:52:14] mask filter thread started for segment 7
[09:52:14] mask filter thread started for segment 8
[09:52:14] decomb filter thread started for segment 29
[09:52:14] mask filter thread started for segment 10
[09:52:14] mask filter thread started for segment 11
[09:52:14] mask filter thread started for segment 12
[09:52:14] mask filter thread started for segment 13
[09:52:14] mask filter thread started for segment 14
[09:52:14] yadif thread started for segment 10
[09:52:14] mask filter thread started for segment 16
[09:52:14] decomb check thread started for segment 0
[09:52:14] mask filter thread started for segment 18
[09:52:14] mask filter thread started for segment 19
[09:52:14] mask filter thread started for segment 20
[09:52:14] mask filter thread started for segment 21
[09:52:14] yadif thread started for segment 23
[09:52:14] yadif thread started for segment 25
[09:52:14] mask filter thread started for segment 24
[09:52:14] mask filter thread started for segment 25
[09:52:14] yadif thread started for segment 31
[09:52:14] work: track 1, dithering not supported by codec
[09:52:14] mask filter thread started for segment 27
[09:52:14] mask filter thread started for segment 28
[09:52:14] work: only 1 chapter, disabling chapter markers
[09:52:14] mask filter thread started for segment 29
[09:52:14] job configuration:
[09:52:14] * source
[09:52:14] + C:\download\sample-Elysium.2013.2160p.mkv
[09:52:14] + title 1, chapter(s) 1 to 1
[09:52:14] mask filter thread started for segment 30
[09:52:14] + container: matroska,webm
[09:52:14] * destination
[09:52:14] + C:\HandBrakeCLI-1.0.1-win-x86_64 (1)\test_elis.mp4
[09:52:14] + container: MPEG-4 (libavformat)
[09:52:14] * video track
[09:52:14] + decoder: hevc
[09:52:14] + filters
[09:52:14] mask filter thread started for segment 31
[09:52:14] + Comb Detect (mode=3:spatial-metric=2:motion-thresh=1:spatial-thresh=1:filter-mode=2:block-thresh=40:block-width=16:block-height=16)
[09:52:14] mask erode thread started for segment 0
[09:52:14] + Decomb (mode=39)
[09:52:14] + Framerate Shaper (mode=2:rate=27000000/900000)
[09:52:14] mask erode thread started for segment 1
[09:52:14] + frame rate: 23.976 fps -> peak rate limited to 30.000 fps
[09:52:14] + Crop and Scale (width=1920:height=1080:crop-top=0:crop-bottom=0:crop-left=0:crop-right=0)
[09:52:14] + source: 3840 * 1606, crop (0/0/0/0): 3840 * 1606, scale: 1920 * 1080
[09:52:14] mask erode thread started for segment 2
[09:52:14] + Output geometry
[09:52:14] + storage dimensions: 1920 x 1080
[09:52:14] + pixel aspect ratio: 1080 : 803
[09:52:14] + display dimensions: 2582 x 1080
[09:52:14] + encoder: H.264 (libx264)
[09:52:14] + preset: fast
[09:52:14] + profile: main
[09:52:14] + level: 4.0
[09:52:14] + quality: 22.00 (RF)
[09:52:14] * audio track 1
[09:52:14] + decoder: English (DTS-HD MA) (5.1 ch) (track 1, id 0x1)
[09:52:14] + bitrate: 1536 kbps, samplerate: 48000 Hz
[09:52:14] + mixdown: Dolby Pro Logic II
[09:52:14] + encoder: AAC (libavcodec)
[09:52:14] + bitrate: 160 kbps, samplerate: 48000 Hz
[09:52:14] mask erode thread started for segment 3
[09:52:14] mask erode thread started for segment 4
[09:52:14] mask erode thread started for segment 5
[09:52:14] mask erode thread started for segment 6
[09:52:14] mask erode thread started for segment 7
[09:52:14] mask erode thread started for segment 8
[09:52:14] mask erode thread started for segment 9
[09:52:14] mask erode thread started for segment 10
[09:52:14] mask erode thread started for segment 11
[09:52:14] mask erode thread started for segment 12
[09:52:14] decomb check thread started for segment 15
[09:52:14] mask erode thread started for segment 14
[09:52:14] mask erode thread started for segment 15
[09:52:14] mask erode thread started for segment 16
[09:52:14] mask erode thread started for segment 17
[09:52:14] decomb check thread started for segment 17
[09:52:14] mask erode thread started for segment 19
[09:52:14] mask erode thread started for segment 20
[09:52:14] mask erode thread started for segment 21
[09:52:14] mask erode thread started for segment 22
[09:52:14] mask erode thread started for segment 23
[09:52:14] mask erode thread started for segment 24
[09:52:14] mask erode thread started for segment 25
[09:52:14] mask erode thread started for segment 26
[09:52:14] mask erode thread started for segment 27
[09:52:14] mask erode thread started for segment 28
[09:52:14] mask erode thread started for segment 29
[09:52:14] mask erode thread started for segment 30
[09:52:14] mask erode thread started for segment 31
[09:52:14] mask dilate thread started for segment 0
[09:52:14] decomb filter thread started for segment 19
[09:52:14] mask dilate thread started for segment 2
[09:52:14] mask dilate thread started for segment 3
[09:52:14] mask dilate thread started for segment 4
[09:52:14] mask dilate thread started for segment 5
[09:52:14] mask dilate thread started for segment 6
[09:52:14] mask dilate thread started for segment 7
[09:52:14] mask dilate thread started for segment 8
[09:52:14] mask dilate thread started for segment 9
[09:52:14] mask dilate thread started for segment 10
[09:52:14] decomb check thread started for segment 28
[09:52:14] decomb check thread started for segment 29
[09:52:14] mask dilate thread started for segment 13
[09:52:14] decomb check thread started for segment 30
[09:52:14] mask dilate thread started for segment 15
[09:52:14] mask dilate thread started for segment 16
[09:52:14] mask dilate thread started for segment 17
[09:52:14] mask dilate thread started for segment 18
[09:52:14] mask dilate thread started for segment 19
[09:52:14] mask dilate thread started for segment 20
[09:52:14] mask dilate thread started for segment 21
[09:52:14] mask filter thread started for segment 2
[09:52:14] mask dilate thread started for segment 23
[09:52:14] mask dilate thread started for segment 24
[09:52:14] mask dilate thread started for segment 25
[09:52:14] mask dilate thread started for segment 26
[09:52:14] mask dilate thread started for segment 27
[09:52:14] mask dilate thread started for segment 28
[09:52:14] mask dilate thread started for segment 29
[09:52:14] mask dilate thread started for segment 30
[09:52:14] mask dilate thread started for segment 31
[09:52:14] yadif thread started for segment 1
[09:52:14] yadif thread started for segment 0
[09:52:14] yadif thread started for segment 2
[09:52:14] yadif thread started for segment 3
[09:52:14] yadif thread started for segment 4
[09:52:14] yadif thread started for segment 5
[09:52:14] yadif thread started for segment 6
[09:52:14] yadif thread started for segment 7
[09:52:14] yadif thread started for segment 8
[09:52:14] yadif thread started for segment 9
[09:52:14] mask filter thread started for segment 15
[09:52:14] yadif thread started for segment 11
[09:52:14] yadif thread started for segment 12
[09:52:14] yadif thread started for segment 13
[09:52:14] yadif thread started for segment 14
[09:52:14] yadif thread started for segment 15
[09:52:14] yadif thread started for segment 17
[09:52:14] yadif thread started for segment 16
[09:52:14] yadif thread started for segment 18
[09:52:14] yadif thread started for segment 19
[09:52:14] yadif thread started for segment 20
[09:52:14] yadif thread started for segment 21
[09:52:14] yadif thread started for segment 22
[09:52:14] mask filter thread started for segment 22
[09:52:14] yadif thread started for segment 24
[09:52:14] mask filter thread started for segment 23
[09:52:14] yadif thread started for segment 26
[09:52:14] yadif thread started for segment 27
[09:52:14] yadif thread started for segment 28
[09:52:14] yadif thread started for segment 29
[09:52:14] yadif thread started for segment 30
[09:52:14] mask filter thread started for segment 26
[09:52:14] sync: expecting 1504 video frames
[09:52:14] encx264: min-keyint: 24, keyint: 240
[09:52:14] encx264: encoding at constant RF 22.000000
[09:52:14] encx264: unparsed options: subme=6:level=4.0:ref=2:weightp=1:8x8dct=0:vbv-bufsize=25000:vbv-maxrate=20000:rc-lookahead=30
x264 [info]: using SAR=1080/803
x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 AVX2 LZCNT BMI2
x264 [info]: profile Main, level 4.0
[09:52:15] sync: first pts audio 0x1 is 270
[09:52:15] sync: first pts video is 0
[09:52:15] sync: "00:00:00.000" (1) at frame 1 time 0
[09:52:48] reader: done. 1 scr changes
[09:52:49] work: average encoding speed for job is 44.039787 fps
[09:52:49] comb detect: heavy 106 | light 250 | uncombed 1141 | total 1497
[09:52:49] decomb: deinterlaced 106 | blended 250 | unfiltered 1141 | total 1497
[09:52:49] vfr: 1497 frames output, 0 dropped and 0 duped for CFR/PFR
[09:52:49] vfr: lost time: 0 (0 frames)
[09:52:49] vfr: gained time: 0 (0 frames) (0 not accounted for)
[09:52:49] dca-decoder done: 5865 frames, 0 decoder errors
[09:52:49] hevc-decoder done: 1497 frames, 0 decoder errors
[09:52:49] sync: got 1497 frames, 1504 expected
[09:52:49] sync: framerate min 23.974 fps, max 23.981 fps, avg 23.976 fps
x264 [info]: frame I:9 Avg QP:18.97 size:279010
x264 [info]: frame P:619 Avg QP:22.61 size: 55908
x264 [info]: frame B:869 Avg QP:23.69 size: 10270
x264 [info]: consecutive B-frames: 17.2% 13.0% 10.0% 59.9%
x264 [info]: mb I I16..4: 18.0% 0.0% 82.0%
x264 [info]: mb P I16..4: 3.8% 0.0% 7.8% P16..4: 40.8% 19.6% 12.5% 0.0% 0.0% skip:15.6%
x264 [info]: mb B I16..4: 4.0% 0.0% 0.3% B16..8: 24.6% 5.6% 0.5% direct: 8.8% skip:56.2% L0:36.7% L1:48.9% BI:14.4%
x264 [info]: coded y,uvDC,uvAC intra: 44.9% 46.5% 12.2% inter: 16.9% 17.1% 1.0%
x264 [info]: i16 v,h,dc,p: 44% 19% 20% 17%
x264 [info]: i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 33% 13% 18% 6% 6% 7% 7% 7% 4%
x264 [info]: i8c dc,h,v,p: 66% 13% 18% 2%
x264 [info]: Weighted P-Frames: Y:1.9% UV:0.0%
x264 [info]: ref P L0: 85.9% 14.1%
x264 [info]: ref B L0: 89.1% 10.9%
x264 [info]: ref B L1: 97.0% 3.0%
x264 [info]: kb/s:5899.37
[09:52:49] mux: track 0, 1497 frames, 46042264 bytes, 5883.60 kbps, fifo 1024
[09:52:49] mux: track 1, 2933 frames, 1252808 bytes, 160.09 kbps, fifo 2048
[09:52:49] libhb: work result = 0

# Encode Completed ...
 
Reactions: Drazick

ddogg

Golden Member
May 4, 2005
1,864
361
136
Man those benchmarks are awesome! I decided to hold off just a bit until the Ek monoblock drops as I want my build to be PERFECT from the get go. Also looks like the taichi is backordered for a while
 

The Stilt

Golden Member
Dec 5, 2015
1,709
3,057
106
Had to design and 3D print a custom mounting bracket for TR, because there simply isn't any coolers (besides the Asetek ones) available.
Some of the cooler manufacturers I sent inquiries to hadn't even heard about AMD SP3 socket.

The bracket is for DeepCool Assassin II, which is probably the best air cooler for TR despite it wasn't even designed for it. Thanks to it's 60x45mm contact surface, it provides 100% coverage of the cores themselves and 78% coverage of the heatspreader.



 
Reactions: Drazick, urvile, lightmanek and 5 others

Markfw

Moderator Emeritus, Elite Member
May 16, 2002
25,761
14,786
136
ddogg said:
Man those benchmarks are awesome! I decided to hold off just a bit until the Ek monoblock drops as I want my build to be PERFECT from the get go. Also looks like the taichi is backordered for a while
Click to expand...
I am backing down the OC until a better cooler is available. On the 4.1 ghz handbrake test, one core got to 97. sent down to 4.0 and it completed in 43 seconds (throttling ?) and 88c.
Going to try cinebench again
 
Reactions: Drazick
M

MarkPost

Senior member
Mar 1, 2017
239
345
136
Markfw said:
Does 44 seconds sound right ?

Temp Dir: C:\Users\markf\AppData\Local\Temp\
Install Dir: C:\Program Files\HandBrake
Data Dir: C:\Users\markf\AppData\Roaming\HandBrake Team\HandBrake\1.0.1.0

-------------------------------------------


# Starting Encode ...

[09:52:05] hb_init: starting libhb thread
[09:52:05] 1 job(s) to process
[09:52:05] json job:
{
"Audio": {
"AudioList": [
{
"Bitrate": 160,
"DRC": 0.0,
"Encoder": 65536,
"Gain": 0.0,
"Mixdown": 6,
"NormalizeMixLevel": false,
"Samplerate": 0,
"Track": 0,
"DitherMethod": 0
}
],
"CopyMask": [
1073807360,
1073743872,
1074003968,
1073750016,
1090519040,
1074790400,
1074266112,
1107296256
],
"FallbackEncoder": 2048
},
"Destination": {
"ChapterList": [
{
"Name": "00:00:00.000"
}
],
"ChapterMarkers": true,
"File": "C:\\HandBrakeCLI-1.0.1-win-x86_64 (1)\\test_elis.mp4",
"Mp4Options": {
"IpodAtom": false,
"Mp4Optimize": false
},
"Mux": 131072
},
"Filters": {
"FilterList": [
{
"ID": 4,
"Settings": {
"mode": "7"
}
},
{
"ID": 3,
"Settings": {
"block-height": "16",
"block-thresh": "40",
"block-width": "16",
"filter-mode": "2",
"mode": "3",
"motion-thresh": "1",
"spatial-metric": "2",
"spatial-thresh": "1"
}
},
{
"ID": 11,
"Settings": {
"crop-bottom": "0",
"crop-left": "0",
"crop-right": "0",
"crop-top": "0",
"height": "1080",
"width": "1920"
}
},
{
"ID": 6,
"Settings": {
"mode": "2",
"rate": "27000000/900000"
}
}
]
},
"PAR": {
"Num": 1080,
"Den": 803
},
"Metadata": {},
"SequenceID": 0,
"Source": {
"Angle": 1,
"Range": {
"Type": "chapter",
"Start": 1,
"End": 1
},
"Title": 1,
"Path": "C:\\download\\sample-Elysium.2013.2160p.mkv"
},
"Subtitle": {
"Search": {
"Burn": true,
"Default": false,
"Enable": true,
"Forced": false
},
"SubtitleList": []
},
"Video": {
"Encoder": 65536,
"Level": "4.0",
"TwoPass": false,
"Turbo": false,
"ColorMatrixCode": 0,
"Options": "",
"Preset": "fast",
"Profile": "main",
"Quality": 22.0,
"OpenCL": false,
"HWDecode": false,
"QSV": {
"Decode": false,
"AsyncDepth": 0
}
}
}
[09:52:05] CPU:
[09:52:05] - logical processor count: 32
[09:52:05] OpenCL device #1: NVIDIA Corporation GeForce GTX 1080 Ti
[09:52:05] - OpenCL version: 1.2 CUDA
[09:52:05] - driver version: 385.28
[09:52:05] - device type: GPU
[09:52:05] - supported: no
[09:52:05] OpenCL device #2: NVIDIA Corporation GeForce GTX 1080 Ti
[09:52:05] - OpenCL version: 1.2 CUDA
[09:52:05] - driver version: 385.28
[09:52:05] - device type: GPU
[09:52:05] - supported: no
[09:52:05] Intel Quick Sync Video support: no
[09:52:05] hb_scan: path=C:\download\sample-Elysium.2013.2160p.mkv, title_index=1
udfread ERROR: ECMA 167 Volume Recognition failed
src/libbluray/disc/disc.c:274: failed opening UDF image C:\download\sample-Elysium.2013.2160p.mkv
src/libbluray/disc/disc.c:352: error opening file BDMV\index.bdmv
src/libbluray/disc/disc.c:352: error opening file BDMV\BACKUP\index.bdmv
[09:52:05] bd: not a bd - trying as a stream/file instead
libdvdnav: Using dvdnav version 5.0.1
libdvdread: Encrypted DVD support unavailable.
libdvdreadVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.IFO failed
libdvdreadVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.BUP failed
libdvdread: Can't open file VIDEO_TS.IFO.
libdvdnav: vm: failed to read VIDEO_TS.IFO
[09:52:05] dvd: not a dvd - trying as a stream/file instead
Input #0, matroska,webm, from 'C:\download\sample-Elysium.2013.2160p.mkv':
Metadata:
title : Elysium (2013)
Duration: 00:01:02.73, start: 0.000000, bitrate: N/A
Chapter #0:0: start 0.000000, end 62.730000
Metadata:
title : 00:00:00.000
Stream #0:0(eng): Video: hevc (Main 10)
yuv420p10le, tv, 3840x1606, PAR 1:1 DAR 1920:803
23.98 fps, 1k tbn (default)
Metadata:
title : Elysium (2013) - Release for ULTRAHDCLUB
BPS : 51036975
BPS-eng : 51036975
DURATION : 00:01:02.604000000
DURATION-eng : 00:01:02.604000000
NUMBER_OF_FRAMES: 1501
NUMBER_OF_FRAMES-eng: 1501
NUMBER_OF_BYTES : 399389852
NUMBER_OF_BYTES-eng: 399389852
_STATISTICS_WRITING_APP: mkvmerge v8.7.0 ('All of the above') 64bit
_STATISTICS_WRITING_APP-eng: mkvmerge v8.7.0 ('All of the above') 64bit
_STATISTICS_WRITING_DATE_UTC: 2016-01-05 22:30:41
_STATISTICS_WRITING_DATE_UTC-eng: 2016-01-05 22:30:41
_STATISTICS_TAGS: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES
_STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES
Stream #0:1(eng): Audio: dts (DTS-HD MA)
48000 Hz, 5.1, fltp, 1536 kb/s (default)
Metadata:
title : DTS-HD MA 7.1 - Blu-ray CEE
BPS : 2706639
BPS-eng : 2706639
DURATION : 00:01:02.561000000
DURATION-eng : 00:01:02.561000000
NUMBER_OF_FRAMES: 5865
NUMBER_OF_FRAMES-eng: 5865
NUMBER_OF_BYTES : 21166260
NUMBER_OF_BYTES-eng: 21166260
_STATISTICS_WRITING_APP: mkvmerge v8.7.0 ('All of the above') 64bit
_STATISTICS_WRITING_APP-eng: mkvmerge v8.7.0 ('All of the above') 64bit
_STATISTICS_WRITING_DATE_UTC: 2016-01-05 22:30:41
_STATISTICS_WRITING_DATE_UTC-eng: 2016-01-05 22:30:41
_STATISTICS_TAGS: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES
_STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES
[09:52:05] scan: decoding previews for title 1
[09:52:05] scan: audio 0x1: dca, rate=48000Hz, bitrate=1536000 English (DTS-HD MA) (5.1 ch)
[09:52:14] scan: 10 previews, 3840x1606, 23.976 fps, autocrop = 0/0/0/0, aspect 2.39:1, PAR 1:1
[09:52:14] libhb: scan thread found 1 valid title(s)
[09:52:14] Skipping subtitle scan. No suitable subtitle tracks.
[09:52:14] starting job
[09:52:14] decomb filter thread started for segment 0
[09:52:14] decomb filter thread started for segment 8
[09:52:14] decomb filter thread started for segment 2
[09:52:14] decomb filter thread started for segment 3
[09:52:14] decomb filter thread started for segment 6
[09:52:14] decomb filter thread started for segment 4
[09:52:14] decomb filter thread started for segment 5
[09:52:14] decomb filter thread started for segment 7
[09:52:14] decomb filter thread started for segment 1
[09:52:14] decomb filter thread started for segment 9
[09:52:14] decomb filter thread started for segment 10
[09:52:14] decomb check thread started for segment 9
[09:52:14] decomb filter thread started for segment 12
[09:52:14] decomb check thread started for segment 12
[09:52:14] decomb filter thread started for segment 14
[09:52:14] decomb filter thread started for segment 15
[09:52:14] decomb filter thread started for segment 16
[09:52:14] decomb filter thread started for segment 17
[09:52:14] decomb check thread started for segment 22
[09:52:14] decomb check thread started for segment 24
[09:52:14] decomb check thread started for segment 25
[09:52:14] decomb filter thread started for segment 21
[09:52:14] decomb filter thread started for segment 22
[09:52:14] decomb filter thread started for segment 23
[09:52:14] decomb filter thread started for segment 24
[09:52:14] decomb filter thread started for segment 25
[09:52:14] decomb filter thread started for segment 26
[09:52:14] decomb filter thread started for segment 27
[09:52:14] decomb filter thread started for segment 28
[09:52:14] mask filter thread started for segment 9
[09:52:14] decomb filter thread started for segment 30
[09:52:14] decomb filter thread started for segment 31
[09:52:14] mask filter thread started for segment 17
[09:52:14] decomb check thread started for segment 1
[09:52:14] decomb check thread started for segment 2
[09:52:14] decomb check thread started for segment 3
[09:52:14] decomb check thread started for segment 4
[09:52:14] decomb check thread started for segment 5
[09:52:14] decomb check thread started for segment 6
[09:52:14] decomb check thread started for segment 7
[09:52:14] decomb check thread started for segment 8
[09:52:14] decomb filter thread started for segment 11
[09:52:14] decomb check thread started for segment 10
[09:52:14] decomb check thread started for segment 11
[09:52:14] decomb filter thread started for segment 13
[09:52:14] decomb check thread started for segment 13
[09:52:14] decomb check thread started for segment 14
[09:52:14] mask erode thread started for segment 13
[09:52:14] decomb check thread started for segment 16
[09:52:14] mask erode thread started for segment 18
[09:52:14] decomb check thread started for segment 18
[09:52:14] decomb check thread started for segment 19
[09:52:14] decomb check thread started for segment 20
[09:52:14] decomb check thread started for segment 21
[09:52:14] decomb filter thread started for segment 18
[09:52:14] decomb check thread started for segment 23
[09:52:14] mask dilate thread started for segment 1
[09:52:14] decomb filter thread started for segment 20
[09:52:14] decomb check thread started for segment 26
[09:52:14] decomb check thread started for segment 27
[09:52:14] mask dilate thread started for segment 11
[09:52:14] mask dilate thread started for segment 12
[09:52:14] mask dilate thread started for segment 14
[09:52:14] decomb check thread started for segment 31
[09:52:14] mask filter thread started for segment 0
[09:52:14] mask filter thread started for segment 1
[09:52:14] mask dilate thread started for segment 22
[09:52:14] mask filter thread started for segment 3
[09:52:14] mask filter thread started for segment 4
[09:52:14] mask filter thread started for segment 5
[09:52:14] mask filter thread started for segment 6
[09:52:14] mask filter thread started for segment 7
[09:52:14] mask filter thread started for segment 8
[09:52:14] decomb filter thread started for segment 29
[09:52:14] mask filter thread started for segment 10
[09:52:14] mask filter thread started for segment 11
[09:52:14] mask filter thread started for segment 12
[09:52:14] mask filter thread started for segment 13
[09:52:14] mask filter thread started for segment 14
[09:52:14] yadif thread started for segment 10
[09:52:14] mask filter thread started for segment 16
[09:52:14] decomb check thread started for segment 0
[09:52:14] mask filter thread started for segment 18
[09:52:14] mask filter thread started for segment 19
[09:52:14] mask filter thread started for segment 20
[09:52:14] mask filter thread started for segment 21
[09:52:14] yadif thread started for segment 23
[09:52:14] yadif thread started for segment 25
[09:52:14] mask filter thread started for segment 24
[09:52:14] mask filter thread started for segment 25
[09:52:14] yadif thread started for segment 31
[09:52:14] work: track 1, dithering not supported by codec
[09:52:14] mask filter thread started for segment 27
[09:52:14] mask filter thread started for segment 28
[09:52:14] work: only 1 chapter, disabling chapter markers
[09:52:14] mask filter thread started for segment 29
[09:52:14] job configuration:
[09:52:14] * source
[09:52:14] + C:\download\sample-Elysium.2013.2160p.mkv
[09:52:14] + title 1, chapter(s) 1 to 1
[09:52:14] mask filter thread started for segment 30
[09:52:14] + container: matroska,webm
[09:52:14] * destination
[09:52:14] + C:\HandBrakeCLI-1.0.1-win-x86_64 (1)\test_elis.mp4
[09:52:14] + container: MPEG-4 (libavformat)
[09:52:14] * video track
[09:52:14] + decoder: hevc
[09:52:14] + filters
[09:52:14] mask filter thread started for segment 31
[09:52:14] + Comb Detect (mode=3:spatial-metric=2:motion-thresh=1:spatial-thresh=1:filter-mode=2:block-thresh=40:block-width=16:block-height=16)
[09:52:14] mask erode thread started for segment 0
[09:52:14] + Decomb (mode=39)
[09:52:14] + Framerate Shaper (mode=2:rate=27000000/900000)
[09:52:14] mask erode thread started for segment 1
[09:52:14] + frame rate: 23.976 fps -> peak rate limited to 30.000 fps
[09:52:14] + Crop and Scale (width=1920:height=1080:crop-top=0:crop-bottom=0:crop-left=0:crop-right=0)
[09:52:14] + source: 3840 * 1606, crop (0/0/0/0): 3840 * 1606, scale: 1920 * 1080
[09:52:14] mask erode thread started for segment 2
[09:52:14] + Output geometry
[09:52:14] + storage dimensions: 1920 x 1080
[09:52:14] + pixel aspect ratio: 1080 : 803
[09:52:14] + display dimensions: 2582 x 1080
[09:52:14] + encoder: H.264 (libx264)
[09:52:14] + preset: fast
[09:52:14] + profile: main
[09:52:14] + level: 4.0
[09:52:14] + quality: 22.00 (RF)
[09:52:14] * audio track 1
[09:52:14] + decoder: English (DTS-HD MA) (5.1 ch) (track 1, id 0x1)
[09:52:14] + bitrate: 1536 kbps, samplerate: 48000 Hz
[09:52:14] + mixdown: Dolby Pro Logic II
[09:52:14] + encoder: AAC (libavcodec)
[09:52:14] + bitrate: 160 kbps, samplerate: 48000 Hz
[09:52:14] mask erode thread started for segment 3
[09:52:14] mask erode thread started for segment 4
[09:52:14] mask erode thread started for segment 5
[09:52:14] mask erode thread started for segment 6
[09:52:14] mask erode thread started for segment 7
[09:52:14] mask erode thread started for segment 8
[09:52:14] mask erode thread started for segment 9
[09:52:14] mask erode thread started for segment 10
[09:52:14] mask erode thread started for segment 11
[09:52:14] mask erode thread started for segment 12
[09:52:14] decomb check thread started for segment 15
[09:52:14] mask erode thread started for segment 14
[09:52:14] mask erode thread started for segment 15
[09:52:14] mask erode thread started for segment 16
[09:52:14] mask erode thread started for segment 17
[09:52:14] decomb check thread started for segment 17
[09:52:14] mask erode thread started for segment 19
[09:52:14] mask erode thread started for segment 20
[09:52:14] mask erode thread started for segment 21
[09:52:14] mask erode thread started for segment 22
[09:52:14] mask erode thread started for segment 23
[09:52:14] mask erode thread started for segment 24
[09:52:14] mask erode thread started for segment 25
[09:52:14] mask erode thread started for segment 26
[09:52:14] mask erode thread started for segment 27
[09:52:14] mask erode thread started for segment 28
[09:52:14] mask erode thread started for segment 29
[09:52:14] mask erode thread started for segment 30
[09:52:14] mask erode thread started for segment 31
[09:52:14] mask dilate thread started for segment 0
[09:52:14] decomb filter thread started for segment 19
[09:52:14] mask dilate thread started for segment 2
[09:52:14] mask dilate thread started for segment 3
[09:52:14] mask dilate thread started for segment 4
[09:52:14] mask dilate thread started for segment 5
[09:52:14] mask dilate thread started for segment 6
[09:52:14] mask dilate thread started for segment 7
[09:52:14] mask dilate thread started for segment 8
[09:52:14] mask dilate thread started for segment 9
[09:52:14] mask dilate thread started for segment 10
[09:52:14] decomb check thread started for segment 28
[09:52:14] decomb check thread started for segment 29
[09:52:14] mask dilate thread started for segment 13
[09:52:14] decomb check thread started for segment 30
[09:52:14] mask dilate thread started for segment 15
[09:52:14] mask dilate thread started for segment 16
[09:52:14] mask dilate thread started for segment 17
[09:52:14] mask dilate thread started for segment 18
[09:52:14] mask dilate thread started for segment 19
[09:52:14] mask dilate thread started for segment 20
[09:52:14] mask dilate thread started for segment 21
[09:52:14] mask filter thread started for segment 2
[09:52:14] mask dilate thread started for segment 23
[09:52:14] mask dilate thread started for segment 24
[09:52:14] mask dilate thread started for segment 25
[09:52:14] mask dilate thread started for segment 26
[09:52:14] mask dilate thread started for segment 27
[09:52:14] mask dilate thread started for segment 28
[09:52:14] mask dilate thread started for segment 29
[09:52:14] mask dilate thread started for segment 30
[09:52:14] mask dilate thread started for segment 31
[09:52:14] yadif thread started for segment 1
[09:52:14] yadif thread started for segment 0
[09:52:14] yadif thread started for segment 2
[09:52:14] yadif thread started for segment 3
[09:52:14] yadif thread started for segment 4
[09:52:14] yadif thread started for segment 5
[09:52:14] yadif thread started for segment 6
[09:52:14] yadif thread started for segment 7
[09:52:14] yadif thread started for segment 8
[09:52:14] yadif thread started for segment 9
[09:52:14] mask filter thread started for segment 15
[09:52:14] yadif thread started for segment 11
[09:52:14] yadif thread started for segment 12
[09:52:14] yadif thread started for segment 13
[09:52:14] yadif thread started for segment 14
[09:52:14] yadif thread started for segment 15
[09:52:14] yadif thread started for segment 17
[09:52:14] yadif thread started for segment 16
[09:52:14] yadif thread started for segment 18
[09:52:14] yadif thread started for segment 19
[09:52:14] yadif thread started for segment 20
[09:52:14] yadif thread started for segment 21
[09:52:14] yadif thread started for segment 22
[09:52:14] mask filter thread started for segment 22
[09:52:14] yadif thread started for segment 24
[09:52:14] mask filter thread started for segment 23
[09:52:14] yadif thread started for segment 26
[09:52:14] yadif thread started for segment 27
[09:52:14] yadif thread started for segment 28
[09:52:14] yadif thread started for segment 29
[09:52:14] yadif thread started for segment 30
[09:52:14] mask filter thread started for segment 26
[09:52:14] sync: expecting 1504 video frames
[09:52:14] encx264: min-keyint: 24, keyint: 240
[09:52:14] encx264: encoding at constant RF 22.000000
[09:52:14] encx264: unparsed options: subme=6:level=4.0:ref=2:weightp=1:8x8dct=0:vbv-bufsize=25000:vbv-maxrate=20000:rc-lookahead=30
x264 [info]: using SAR=1080/803
x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 AVX2 LZCNT BMI2
x264 [info]: profile Main, level 4.0
[09:52:15] sync: first pts audio 0x1 is 270
[09:52:15] sync: first pts video is 0
[09:52:15] sync: "00:00:00.000" (1) at frame 1 time 0
[09:52:48] reader: done. 1 scr changes
[09:52:49] work: average encoding speed for job is 44.039787 fps
[09:52:49] comb detect: heavy 106 | light 250 | uncombed 1141 | total 1497
[09:52:49] decomb: deinterlaced 106 | blended 250 | unfiltered 1141 | total 1497
[09:52:49] vfr: 1497 frames output, 0 dropped and 0 duped for CFR/PFR
[09:52:49] vfr: lost time: 0 (0 frames)
[09:52:49] vfr: gained time: 0 (0 frames) (0 not accounted for)
[09:52:49] dca-decoder done: 5865 frames, 0 decoder errors
[09:52:49] hevc-decoder done: 1497 frames, 0 decoder errors
[09:52:49] sync: got 1497 frames, 1504 expected
[09:52:49] sync: framerate min 23.974 fps, max 23.981 fps, avg 23.976 fps
x264 [info]: frame I:9 Avg QP:18.97 size:279010
x264 [info]: frame P:619 Avg QP:22.61 size: 55908
x264 [info]: frame B:869 Avg QP:23.69 size: 10270
x264 [info]: consecutive B-frames: 17.2% 13.0% 10.0% 59.9%
x264 [info]: mb I I16..4: 18.0% 0.0% 82.0%
x264 [info]: mb P I16..4: 3.8% 0.0% 7.8% P16..4: 40.8% 19.6% 12.5% 0.0% 0.0% skip:15.6%
x264 [info]: mb B I16..4: 4.0% 0.0% 0.3% B16..8: 24.6% 5.6% 0.5% direct: 8.8% skip:56.2% L0:36.7% L1:48.9% BI:14.4%
x264 [info]: coded y,uvDC,uvAC intra: 44.9% 46.5% 12.2% inter: 16.9% 17.1% 1.0%
x264 [info]: i16 v,h,dc,p: 44% 19% 20% 17%
x264 [info]: i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 33% 13% 18% 6% 6% 7% 7% 7% 4%
x264 [info]: i8c dc,h,v,p: 66% 13% 18% 2%
x264 [info]: Weighted P-Frames: Y:1.9% UV:0.0%
x264 [info]: ref P L0: 85.9% 14.1%
x264 [info]: ref B L0: 89.1% 10.9%
x264 [info]: ref B L1: 97.0% 3.0%
x264 [info]: kb/s:5899.37
[09:52:49] mux: track 0, 1497 frames, 46042264 bytes, 5883.60 kbps, fifo 1024
[09:52:49] mux: track 1, 2933 frames, 1252808 bytes, 160.09 kbps, fifo 2048
[09:52:49] libhb: work result = 0

# Encode Completed ...
Click to expand...
dont know, thats with the x264 encoder (the thread test is with x265), I'll do it with my 1700X, how is clocked your TR?
please try the x265 encoder, its the "H.265 MKV 1080p30" preset

EDIT: whats the preset you have used for the x264 test?
 
You must log in or register to reply here.

TRENDING THREADS

COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |