Rig:
Mobo: Asus P8Z77-V-PRO
Cpu: i7- 3770k
Gpu: Nvidia GTX 670 FTW
Ram:
Trident X 16GB
(F3-2400C10D-16GTX)
https://www.gskill.com/en/product/f3-2400c10d-16gtx
Os: Windows 7 Pro 64
Cooling: Watercooled
Programs: Core temp, Cpu-z, Prime95
link used \video : www.overclocknet/t/1291703/ivy-bridge-overclocking-guid...
Hi, Im trying to overclock my Cpu, but i can barely get the ball moving because of an error i am unfamiliar with.
tried to get to 4.5hz
For a baseline :
My Bios settings are all set to auto, i run prime95 to test stability, everything works fine
following the video, it said to do a basic beginning test before changing the variables:
1.changing overclock to tuner to manual and leaving all to auto,
2. changing the ram timing to what is on the package which is 10-12-12-31-2N latency
3.memory frequency to what our ram can handle, that being 2400mhz for me.
4. dram voltage to 1.65
after completing those steps i run prime95 again, this time it doesnt run a complete test
i get the following error almost instantly:
FATAL ERROR: Rounding was 0.5, expected less than 0.4
what does that mean?
after that, i followed the entire video, changing settings and just trying to add more vcore to get it to work. i went from 1.25 to 1.50 nothing changed, except for the additional bluescreen every now and then.
what should i try to do next?
ive also ran memtest86 with 4 passes just to check if my ram was bad.
the problem seems to be correlated with just changing the mem frequency to 2400 instead of leaving at the auto of 1333
any solutions?
Mobo: Asus P8Z77-V-PRO
Cpu: i7- 3770k
Gpu: Nvidia GTX 670 FTW
Ram:
Trident X 16GB
(F3-2400C10D-16GTX)
https://www.gskill.com/en/product/f3-2400c10d-16gtx
Os: Windows 7 Pro 64
Cooling: Watercooled
Programs: Core temp, Cpu-z, Prime95
link used \video : www.overclocknet/t/1291703/ivy-bridge-overclocking-guid...
Hi, Im trying to overclock my Cpu, but i can barely get the ball moving because of an error i am unfamiliar with.
tried to get to 4.5hz
For a baseline :
My Bios settings are all set to auto, i run prime95 to test stability, everything works fine
following the video, it said to do a basic beginning test before changing the variables:
1.changing overclock to tuner to manual and leaving all to auto,
2. changing the ram timing to what is on the package which is 10-12-12-31-2N latency
3.memory frequency to what our ram can handle, that being 2400mhz for me.
4. dram voltage to 1.65
after completing those steps i run prime95 again, this time it doesnt run a complete test
i get the following error almost instantly:
FATAL ERROR: Rounding was 0.5, expected less than 0.4
what does that mean?
after that, i followed the entire video, changing settings and just trying to add more vcore to get it to work. i went from 1.25 to 1.50 nothing changed, except for the additional bluescreen every now and then.
what should i try to do next?
ive also ran memtest86 with 4 passes just to check if my ram was bad.
the problem seems to be correlated with just changing the mem frequency to 2400 instead of leaving at the auto of 1333
any solutions?