CPU: Malay 1.6A@2.24; 140FSB x 16 (mWave)
MB: P4B266(full)
RAM: Mushkin 512 2100 HiPerf (Turbo 1 Mode)
Cooler: AVC Sunflower/AS
Bios V: 1.65, Probe: 1.552 load; 1.6 normal
SB Live
Asus V7700
Enermax EG365P 350w
Temp: 40 - 43C
Prime95 continues to crash at this point, while the rest of the system remains stable. I am concerned about my 12V supply which drops to under 12v on the Probe and to about 12.05 on my DigDoc5 when the system goes under load either with Prime or Sandra. Runs consistently at 12.22 otherwise. I would like to push the memory some, but I'm not really sure how to do it. I did bump it up off the default V one setting when I was installing the board, but I haven't messed with it otherwise.
Update: Upped the bios voltage to 1.65 which is giving me between 1.584 and 1.6 on the Probe. Temp climbed to 43C but the fans are starting to kick on and temp is holding easily. Prime95 has been up for about 20 minutes, I'm heading to bed and I'll see if it's still up in the morning. As an FYI the system has been together since Wed, I was running at 2.133 with no problems, but I hadn't really tried to stress it.
Update: Ran Prime95 and the Sandra for 8 hours together, no problems. When I bump up the FSB to 145 Prime fails and eventually the system will crash, so it's staying at 140 for now. Everything else is fine, except my FLCS won't load any programs, but my Thrustmaster stuff has always been a pain.