Venice E6 Chips shipping now

[khurios2000]

Originally posted by: frododies
ordered one 8/10, and the status has been 'in warehouse' since then

same here, i ordered on 8/10

 

[kamranziadar]

Originally posted by: khurios2000

Originally posted by: frododies
ordered one 8/10, and the status has been 'in warehouse' since then

same here, i ordered on 8/10

Well i have same issue i call them on friday and they said they shipped it even it says it is still in the warehouse, but it is shipped they will update it later.

 

[RideFree]

Originally posted by: khurios2000

Originally posted by: frododies
ordered one 8/10, and the status has been 'in warehouse' since then

Me too.
I ordered on 8/10

Exactamente!
Yes, thank goodness mine has been safely in the warehouse since the morning of 8-10 rather than on the road or in the air somewhere, where it might not be as safe.

 

[thefamoustraders]

^^ Same here, except I ordered a pair on 8/9 and the two of them have been shown to be gallivanting around the warehouse ever since. o_0


On a better note, this is my second order from E-Wiz. First order was complete, on time and I got the exact product I ordered.

Thanks again OP & Staff

 

[kamranziadar]

Originally posted by: DanDaMan315

Originally posted by: kamranziadar
It is really surprising that none of us got their CHIP yet, or people are mad because it did not overclock well. If any body got its chip and have some results please post it here so other people will know whats going on.
If this chip is really bad then some of us might still cancel their orders.
Need some reviews people.

Be patient, if you don't want to take the risk cancel your order now and wait for more results.

Well i cannot cancel my order now because my Motherboard will be here on Monday and i talked to them they said it has been shipped, and there is no cancel button in the bottom of my order now.
So i guess i have to wait and see what happens

 

[RideFree]

Never did see a cancel button on my order
I would probably have jumped to the 3500+ for $218 if I knew then what I know now.

 

[DanDaMan315]

Originally posted by: RideFree
Never did see a cancel button on my order
I would probably have jumped to the 3500+ for $218 if I knew then what I know now.

Of course they will clock to the same place, save your money and buy a better motherboard.

 

[Homerboy]

<---my 3000+ OC'ed (stock cooling)

 

[slag]

Originally posted by: DanDaMan315

Originally posted by: Dynamix3D
Hey guys I've noticed that most of the people with these very high overclocks all have DFI boards. I am just wondering if I should waste my time ordering one of these because I have an MSI K8N Neo2 Plat and it obviously, doesn't have as high of voltages for the RAM. So I just wanna make sure I would still be able to hit 2.7Ghz with the 2.85v limit I have for my memory. Any ideas?

That board maxs at around 250 fsb, so thats 2.25ghz. :frown:

I currently have my board at 280. It definitely does not max out at 250. I can run 8x300 with no problems also.

 

[kamranziadar]

Originally posted by: Homerboy
<---my 3000+ OC'ed (stock cooling)

What speed you are running it.

 

[KIAman]

Originally posted by: kamranziadar

Originally posted by: Homerboy
<---my 3000+ OC'ed (stock cooling)

What speed you are running it.

His smiley face is his link to his picture. ~2800MHZ, smoking!!!

 

[pibb]

Originally posted by: KIAman

Originally posted by: kamranziadar

Originally posted by: Homerboy
<---my 3000+ OC'ed (stock cooling)

What speed you are running it.

His smiley face is his link to his picture. ~2800MHZ, smoking!!!

Revision number in that screenshot says E3 though?? I don't think thats the new chip

 

[ToyYoda]

Originally posted by: pibb

Originally posted by: KIAman

Originally posted by: kamranziadar

Originally posted by: Homerboy
<---my 3000+ OC'ed (stock cooling)

What speed you are running it.

His smiley face is his link to his picture. ~2800MHZ, smoking!!!

Revision number in that screenshot says E3 though?? I don't think thats the new chip

cpu-z doesnt support the new e6 chips IIRC.

Honestly, all I want is 2.4ghz stable with this chip but I would settle for 3500 speeds @ 2.2ghz.

 

[evetstech]

no, cpuz does support it. It should say FF2, not FF0, he has an e3. And the revision should just be blank, and not say e3 at all. Even the OP at XS had a E3, check my ss for info, its at the xtremesystems website. guys, you will not reach that high of speeds. Alot are not even reaching 2.7. I'm the only one (so far) that got 2.7ghz on 1.57. Be very cautious on buying this chip. YMMV really big time with this one.

 

[pibb]

I thought that info seemed wrong, myself i'm just gonna pay the extra 7$ for the e3 and hope like hell i can reach 2.4/5 with it

 

[DanDaMan315]

I demand a OC guarantee from AMD, I'm just kidding.

 

[pibb]

heh Dan, did you ever fix your system? Sucks about your moddable DFI, hopefully you'll get another older model back after RMA.. good luck!

 

[evetstech]

Originally posted by: pibb
I thought that info seemed wrong, myself i'm just gonna pay the extra 7$ for the e3 and hope like hell i can reach 2.4/5 with it

Most e3 and e6 will reach 2.4/2.5 easy. It's all on what you want I guess. The newer e3's (YBBLE) won't do as good as the older LBBLE steppings. It's all luck, but I can personally say I've only seen 2 people that haven't reached 2.4 with these chips.

 

[pibb]

Great im set then

 

[IceMole]

My E6 from ewiz is benching right now 290x9 @ 1.45 so far 7hrs prime stable.

 

[510kut]

deng... i was going to buy one of these but I'm not so sure anymore. Maybe I should just get a retail chip from like monarch.

 

[DanDaMan315]

Originally posted by: pibb
heh Dan, did you ever fix your system? Sucks about your moddable DFI, hopefully you'll get another older model back after RMA.. good luck!

They're all modable, they just put epoxy over the points now, and that can be scrapped off easily.

 

[Homerboy]

Never said mine was the new E6... but with those kinda results on an E3, who cares Point being, the 3000+ are GENERALLY amazing overclockers... 2.4+ the vast majority of the time. Regardless of stepping I can't do anything but recommend getting one.

 

[pibb]

Originally posted by: DanDaMan315

Originally posted by: pibb
heh Dan, did you ever fix your system? Sucks about your moddable DFI, hopefully you'll get another older model back after RMA.. good luck!

They're all modable, they just put epoxy over the points now, and that can be scrapped off easily.

really, thats awesome if i'd known that i'd probley went with the Ultra DFI board over MSI SLI (it was cheap refurbed)

 

[Aquila76]

Originally posted by: DanDaMan315
eWiz is a really good company, you'll get what you order don't worry.

I sent an RMA request to Monarch for my video card, does anyone know how good their RMA process is? I've only had to RMA with Newegg before, and they are first class for sure.

I had to RMA a fan controller with them and it went flawlessly. They don't cross-ship, so I was w/o it for about 4 days (used 2nd Day air and they 2nd Day's it back to me the same day they received it!)