I have a vlan setup here that I'm trying to get working. My current network is setup across a couple of switches and 2 wlan switches. My server is configured with 2 nics. Nic 1 configured as 10.0.0.x and nic 2 configured as 192.168.100.x and set to vlan 100.
I'm trying to configure this setup so that the wlan aps can tag the wifi traffic as vlan 100 and 1 of the remote switches to do the same. The switch the server’s vlan nic is plugged into is configured as tagged for vlan100 and all the rest are untagged in vlan1 so the bulk of the lan can reach the server.
The wifi aps are set to tag any traffic on vap1 as vlan100. The remote switch is configured to tag all ports except 1 as vlan100. The remaining port is untagged in vlan1.( there is a dedicated line run from this single port to the main switch. All computers plugged into this switch should participate in the vlan only.)
It’s not working though, dhcp requests are not making It to the server, and while sniffing traffic from the tagged vlan nic on the server I see only traffic from itself, nothing remote.
I'm clearly doing something wrong, but I'm not sure where. I’ve tried variations on tagged versus untagged and excluded etc with no luck. Anyone have any ideas?
I'm trying to configure this setup so that the wlan aps can tag the wifi traffic as vlan 100 and 1 of the remote switches to do the same. The switch the server’s vlan nic is plugged into is configured as tagged for vlan100 and all the rest are untagged in vlan1 so the bulk of the lan can reach the server.
The wifi aps are set to tag any traffic on vap1 as vlan100. The remote switch is configured to tag all ports except 1 as vlan100. The remaining port is untagged in vlan1.( there is a dedicated line run from this single port to the main switch. All computers plugged into this switch should participate in the vlan only.)
It’s not working though, dhcp requests are not making It to the server, and while sniffing traffic from the tagged vlan nic on the server I see only traffic from itself, nothing remote.
I'm clearly doing something wrong, but I'm not sure where. I’ve tried variations on tagged versus untagged and excluded etc with no luck. Anyone have any ideas?
Last edited: