I read through the sticky on watercooling, but I still don't feel too confident being my first watercooling setup. I have selected 1/2" (I don't really understand the 1/2" 3/8" stuff) but I will change to 3/8" if it will bring a better experience (cooling, installing, etc.). So far this is what I have selected, if you know any other website that sells watercooling parts for low then please post them as frozencpu.com isn't too good on that.
CPU block: D-Tek Fuzion v2
Reservoir: Swiftech MCRES High-Flow Reservoir
Radiator: Black Ice GTX 240
Pump: Swiftech MCP655
With tubing I am not too sure but I would probably go with Tygon because ... >.>, nice reason huh? I chose the D-Tek Fuzion because of the good reviews on it, but I will switch to something else if it doesn't match with the system (i.e. water flow, friction, etc.). It might be overkill at the moment that I am using a 2x120mm radiator but I plan on adding GPU blocks right after I get this going and maybe a NB block. I don't know if there is a big enough difference (they both cost the same) so I would probably just go with the x-flow unless otherwise stated by posts. Suggestions are NEEDED please!! Thanks!
CPU block: D-Tek Fuzion v2
Reservoir: Swiftech MCRES High-Flow Reservoir
Radiator: Black Ice GTX 240
Pump: Swiftech MCP655
With tubing I am not too sure but I would probably go with Tygon because ... >.>, nice reason huh? I chose the D-Tek Fuzion because of the good reviews on it, but I will switch to something else if it doesn't match with the system (i.e. water flow, friction, etc.). It might be overkill at the moment that I am using a 2x120mm radiator but I plan on adding GPU blocks right after I get this going and maybe a NB block. I don't know if there is a big enough difference (they both cost the same) so I would probably just go with the x-flow unless otherwise stated by posts. Suggestions are NEEDED please!! Thanks!