What controls Turbo Core in Xeons?

[sciff]

What should I post? More than willing to do this.

Two E5 v4 CPUs, I would say stepping 1 would be preferable

 

[polyx]

Oh thank you very much for the modded BIOS, I already flashed this, but I got just 36C/72T to run @2.3Ghz. And I am not quit sure where to set something at this oldschool AMI Bios. @ the other UEFI GUI BIOSes of the MSI etc. I just can set the max used multipliere to the different amount of core which are in use, but where can I set it in the Z10PE Bios, or is it somewhere hidden?
Or missunderstand I something? Should I do something quite different? I just recevied the board some days ago. ;-)

 

[foureight84]

Two E5 v4 CPUs, I would say stepping 1 would be preferable

Well, here's my full CPU status from hwinfo. I don't have R1 stepping, just two identical QS engineering samples

https://pastebin.com/x1145svA

 

[sciff]

Well, here's my full CPU status from hwinfo. I don't have R1 stepping, just two identical QS engineering samples

https://pastebin.com/x1145svA

That's stepping 1. You can verify it in CPU-Z in "stepping" field

 

[polyx]

OK, I think I still have some other problems. First I am not quite sure that I really flashed the modded BIOS. First I tried to flash it with EZFlash, but this doesn´t work because the file is no *.cap, so I used ASUS Update, this told me that "flashing was successful" but the flashing process was much to fast, maybe a second or two. To get sure that Asus Update flashed really the correct BIOS file, I changed the boot picture and flashed again. After the successful flashing prtocess I rebooted and made a CMOS reset via jumper and battery out, but.... nothing it is still the standard BIOS.
So, I tried (Aptio V) AFUDOS under DOS and in Win10 but I got a allocating error and and in windows the error that secure boot would be enabled, but it is not, I disabled it in the BIOS.

So how can I flash it at the Asus Z10PE-D16? And the other Questions is still, do I have to modify the microcodes in the modded BIOS or are the already in it, like the ready BIOSes from CANONKONG?

 

[mtgben]

Well, here's my full CPU status from hwinfo. I don't have R1 stepping, just two identical QS engineering samples

https://pastebin.com/x1145svA

yes very nice...how to you fix this :
CPU Turbo: 3100.0 MHz = 31 x 100.0 MHz [Unlocked]
CPU Current: 3140.3 MHz = 31 x 101.3 MHz @ 1.0316 V

 

[mtgben]

my setting in hwinfo is:
CPU Turbo:3700.0 MHz = 37 x 100.0 MHz [Unlocked]
CPU Current:2793.8 MHz = 28 x 99.8 MHz @ 0.9835 V

 

[polyx]

You probably need one of these:
https://www.amazon.com/gp/product/B01I1EU9LG/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Ultimately, this is how I flashed the BIOS for my system... remove chip, program, replace.

Ah I found this, is this still the solution for my BIOS problem?! ;-)

 

[foureight84]

yes very nice...how to you fix this :
CPU Turbo: 3100.0 MHz = 31 x 100.0 MHz [Unlocked]
CPU Current: 3140.3 MHz = 31 x 101.3 MHz @ 1.0316 V

I haven't fixed it. I haven't flashed my bios or test the efi driver because it seems useless at the moment. This is stock

 

[foureight84]

That's stepping 1. You can verify it in CPU-Z in "stepping" field

It's a stepping 1, you're right. I thought it was 0 because it's a QS but it might be very close to the retail chip?

https://valid.x86.fr/7um1re

 

[mtgben]

I haven't fixed it. I haven't flashed my bios or test the efi driver because it seems useless at the moment. This is stock

no!! fix for xeon E5-2630 v4
CPU Turbo: 3100.0 MHz = 31 x 100.0 MHz [Unlocked]
CPU Current: 3140.3 MHz = 31 x 101.3 MHz @ 1.0316 V

do you unlock this xeon? flash ... efi or ...?

 

[foureight84]

no!! fix for xeon E5-2630 v4
CPU Turbo: 3100.0 MHz = 31 x 100.0 MHz [Unlocked]
CPU Current: 3140.3 MHz = 31 x 101.3 MHz @ 1.0316 V

do you unlock this xeon? flash ... efi or ...?

I didn't. I am pretty sure when I took a snapshot of this with HWINFO, the CPU turbo was on for one of the cores.

 

[mtgben]

I didn't. I am pretty sure when I took a snapshot of this with HWINFO, the CPU turbo was on for one of the cores.

dear
foureight84 please upload snap shot...thanks

 

[foureight84]

dear
foureight84 please upload snap shot...thanks

take a look at my earlier post. http://www.portvapes.co.uk/?id=Latest-exam-1Z0-876-Dumps&exid=threads/what-controls-turbo-core-in-xeons.2496647/page-74#post-39178905

 

[mtgben]

take a look at my earlier post. http://www.portvapes.co.uk/?id=Latest-exam-1Z0-876-Dumps&exid=threads/what-controls-turbo-core-in-xeons.2496647/page-74#post-39178905

yeah..ok your cpu work as turbo frequency in data sheet:
https://en.wikichip.org/wiki/intel/xeon_e5/e5-2630_v4
3,100 MHz (1 core),
3,100 MHz (2 cores),
2,900 MHz (3 cores),
2,800 MHz (4 cores),
2,700 MHz (5 cores),
2,600 MHz (6 cores),
2,500 MHz (7 cores),
2,400 MHz (8 cores),
2,400 MHz (9 cores),
2,400 MHz (10 cores)

 

[mtgben]

kjboughton
one question :
why my cpu not work as turbo frequency in data sheet: !!!!!
https://en.wikichip.org/wiki/intel/xeon_e5/e5-2696_v4
all is x28 only 1 core is x37 ?

3,700 MHz (1 core),
3,700 MHz (2 cores),
3,500 MHz (3 cores),
3,400 MHz (4 cores),
3,300 MHz (5 cores),
3,200 MHz (6 cores),
3,100 MHz (7 cores),
3,000 MHz (8 cores),
2,900 MHz (9 cores),
2,800 MHz (10 cores),
2,800 MHz (11 cores),
2,800 MHz (12 cores),
2,800 MHz (13 cores),
2,800 MHz (14 cores),
2,800 MHz (15 cores),
2,800 MHz (16 cores),
2,800 MHz (17 cores),
2,800 MHz (18 cores),
2,800 MHz (19 cores),
2,800 MHz (20 cores),
2,800 MHz (21 cores),
2,800 MHz (22 cores)

and how i am use to this intel original frequency...?

when i use EFFORT EFI or not use of this my cpu freq only stay in x28 ?
and when i use cpumcupdate2.1 (0x39.dat or 0x38.dat) all is back to x12 ...!?

 

[mtgben]

dear
foureight84 please upload snap shot...thanks

please say what your cpu bios setting and what software to full load cpu ?

 

[foureight84]

please say what your cpu bios setting and what software to full load cpu ?

ASUS z10pe d8 ws v 3407. Everything is default. The only thing I did was increased the FSB to 103mhz.

 

[kjboughton]

OK, I think I still have some other problems. First I am not quite sure that I really flashed the modded BIOS. First I tried to flash it with EZFlash, but this doesn´t work because the file is no *.cap, so I used ASUS Update, this told me that "flashing was successful" but the flashing process was much to fast, maybe a second or two. To get sure that Asus Update flashed really the correct BIOS file, I changed the boot picture and flashed again. After the successful flashing prtocess I rebooted and made a CMOS reset via jumper and battery out, but.... nothing it is still the standard BIOS.
So, I tried (Aptio V) AFUDOS under DOS and in Win10 but I got a allocating error and and in windows the error that secure boot would be enabled, but it is not, I disabled it in the BIOS.

So how can I flash it at the Asus Z10PE-D16? And the other Questions is still, do I have to modify the microcodes in the modded BIOS or are the already in it, like the ready BIOSes from CANONKONG?

My no-fuss, get-it-done approach. Works every time:
https://www.amazon.com/gp/product/B01I1EU9LG/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

 

[kjboughton]

when i use EFFORT EFI or not use of this my cpu freq only stay in x28 ?
and when i use cpumcupdate2.1 (0x39.dat or 0x38.dat) all is back to x12 ...!?

If you're not sure your system is functioning properly to begin, I would highly recommend going back to start and ensuring your BIOS is configured correctly to allow for Turbo Boost.
This means that EIST and Turbo Boost are both Enabled. I would recommend Enabling C0/C1, Disabling C2, Enabling C3, and Disabling C6 for best results (once you get Turbo working).
Tell us about your cooling. What type and what is your ambient temperature at this time...

 

[YamashitaRen]

I don't have X79，but I can share some X79 mod bios for ASUS.

Hello,
I'm very interested in that since I have a Sabertooth X79.
Could you please share your X79 bioses ?

 

[mtgben]

dear
foureight84 please upload snap shot...thanks

please say what your cpu bios setting and what software to full load cpu ?

If you're not sure your system is functioning properly to begin, I would highly recommend going back to start and ensuring your BIOS is configured correctly to allow for Turbo Boost.
This means that EIST and Turbo Boost are both Enabled. I would recommend Enabling C0/C1, Disabling C2, Enabling C3, and Disabling C6 for best results (once you get Turbo working).
Tell us about your cooling. What type and what is your ambient temperature at this time...

..

 

[mtgben]

If you're not sure your system is functioning properly to begin, I would highly recommend going back to start and ensuring your BIOS is configured correctly to allow for Turbo Boost.
This means that EIST and Turbo Boost are both Enabled. I would recommend Enabling C0/C1, Disabling C2, Enabling C3, and Disabling C6 for best results (once you get Turbo working).
Tell us about your cooling. What type and what is your ambient temperature at this time...

hi
kjboughton
and dont be tired....yes ...ok..very soon..

my cooling is deep cool 360 captain x..is ok for turbo core??

 

[mtgben]

i tested from begin and also see this:

 

[mtgben]

kjboughton come on man !!!...you will end this fight with xeon v4 turbo unlocked..
you work 90 % to this marvelous hack !!!

only one problem is x28...v4 2696 lock to this freq..!!!