What FSB and what motherboard are you using VIA AMD 266a users?

[darth maul]

Just want to know what real world peeps are getting with their 266a AMD DDR boards? What FSB are you stable at, and what motherboard are you using? None of this, I got it to 190FSB out of the box stuff, then ferget to tell us if you so much as move the mouse wrong it locks up at that speed. I want to know real results. Oh, and what memory, and memory settings!!!

 

[CStroman]

Running my Duron at 140 on my 8KHA+, 256 MB Crucial PC2100, set on "turbo."

 

[moocat]

Abit KR7A non-raid @ 140mhz fsb. 150mhz resulted in data corruption but this system has only been alive for a few days. I may be able to improve on that. I'm suspecting it's the IBM drive I'm using that is holding me back (my 40gig WD drive bit the dust yesterday ) I haven't even checked for updated bios files yet.

It performs very well were it's at already though

-Radeon 8500
-2x256mb Crucial PC2100
-Audigy
-3c905 nic
-1ghz AXIA tbird @ 1.33ghz (140 x 9.5)
-Enermax 465VE PS (+5 volt hanging around 4.87 V.)
-13gig IBM ata66/7200rpm HD

 

[Y23KC]

I have an Epox 8k7a at 166mhz. The ram is Crucial PC2100 256mb. The ram settings are 8-8-6-2-2-2-2. Runs rock stable.

 

[SnowPunk98]

I got a Epox 8KHA+ but havnt overclocked yet though I am ready with new bios and everything. I am getting watercooling for Christmas and hope to be able to hit 166FSB at cas 2-2-2 I will post results in a few weeks

 

[t4t3r]

XP 1600 at default, 133 fsb on epox 8kha+. memory set to cas2. rock solid obviously. fastest without soft boot problem was 150, havent gone any higher. also running 11/2 bios...i love this comp...



t4t3r

 

[Sockmonkey4]

I've got my Dragon+ running at 145FSB on "turbo" with 3 sticks of crucial PC2100

I just picked 145 the first night I set up my machine (two weeks ago). Been running 100% stable.
Haven't bothered to see if it will go any higher.

 

[RustyNale]

153fsb on a 8KHA+, Crucial 2100 at turbo, 2-2-5-2-1. 2sticks of 256. Running rock solid.

 

[LostHiWay]

150fsb on 8kha+, 3x256mb crucial ddr 2100, memory setting set to fastest...tried turbo setting but I would get some random errors probably because I had all slots filled

 

[Insane3D]

165mhz FSB with three 256mb sticks of unbuffered Crucial on a Epox 8KHA+. I use the following settings which are the most aggressive...


System Performance - Turbo
DRAM Clock- 133mhz
DRAM Timing - Manual
SDRAM Cycle Length - 2
Bank Interleave - 4 Way
DRAM PreChrg to Act CMD - 2T
DRAM Act to PreChrg CMD - 6T
DRAM Active to CMD - 2T
DRAM Queue Depth - 4 Level
DRAM Drive Strength - Auto
DRAM Command Rate - 1T Command
DCLKI Timing - 0 ns
DCLKO Timing - 0 ns
Fast R-W Turn Around - Enabled
Continuous DRAM Request - Enabled

Thing runs like a champ 24/7 with 5 of the 6 PCI slots filled as well!

 

[CraigRT]

KT133A for me running 150 CAS2, haven't even pushed higher!! (i like the nice even number) I think the new KT266A chipset is going to have kick ass potential when i get it installed in my system coming soon. I just have to figure out what the best RAM will be for me.. I am thinking it will be the Crucial PC2100, many people seem to have great results with this stuff which is somewhat surprising (simply beacuse some of the numbers are so high) Anyone have the Soltek SL-75DRV2 ? I can get my hands on one of these badboys really cheap, wondered what people thought of it. I am very strongly thinking of getting this board, I can save alot on it, and it's suppose to be a gem too!

 

[ssrgp0]

1600XP @ 145FSB = 1800XP, 8kha+ mobo on turbo setting, no luck ups and stable as hell, running on 300W PSU w/ 3 7200RPM HD, 2x256MB Crucial DDR2100, DVDROM+CD-R, GF3 Ti 200 video, 3com 905 NIC, Soundblaster Live. Thumbs up.

 

[billyjak]

Abit KR7A Raid board at 142 FSB XP 1900
Stable at that speed, any higher unstable, need better cooling