what power supplies are you running ?

[ColossusX]

Originally posted by: twajetmech
I run a PC power and Cooling 510 deluxe...love it !

Same here!!
Also running several Antec True430s, also nice, but not as nice as the PCP&C psu's

 

[jwkuipers]

I also have the PC Power and Cooling 510 Deluxe - But the ESP12V version as I plan on getting opterons or xeons shortly. If you think the regular 510 Delux is expensive at $80, this cost me $200!!!

Works the balls though, had a short brownout (less than a second) everthing in my house went out and then back on. My monitor, speakers, lights, 2 of my others computers, etc. Exept for the comptuer with the 510 Delux!!! W00t!

 

[Gurck]

Antec SmartPower 350w, looks like mine's smaller than most



I don't OC though, and it's enough for my 'current' needs (yuk yuk), though when I upgrade my video card I'll likely be looking at a new psu to boot.

 

[Pete84]

Right now - a cheap "TigerPro" 300 watt PSU.

I have an Antec 550True in my drawyer though, think I'll get it put in when I get around to repairing/replacing my motherboard . . . .

 

[PCTweaker5]

Running a beautiful just sleeved Enermax 470watter.

 

[RS3RS]

Fortron 300 watt w/ "noise killer" (120mm fan)

Powering:

Pentium 4 2.66B @ 3.0 ghZ
Two sticks of 512 RAM, 2.8 volts
CD burner
DVD burner
Overclocked 9800 pro
Floppy Drive
One PCI video card (for the third monitor)
Seagate 120gb HDD
WD 13gb backup HDD
6 case fans

Rails are 100% stable, even under load

 

[yourdeardaniel]

Enermax 550w EG651P-VE(FMA)

RS3RS, that's alot of monitors u have!

 

[myocardia]

I'm running an Antec TruePower 480 that I need to either replace or mod. It's rail (at idle) are 3.11, 4.85, 11.52. Any of you guys still have that link to how to mod an Antec TruePower?

 

[DaNorthface]

Originally posted by: myocardia
I'm running an Antec TruePower 480 that I need to either replace or mod. It's rail (at idle) are 3.11, 4.85, 11.52. Any of you guys still have that link to how to mod an Antec TruePower?

i think it's your wire connections/connector that's making it so low

 

[myocardia]

Originally posted by: DaNorthface

Originally posted by: myocardia
I'm running an Antec TruePower 480 that I need to either replace or mod. It's rail (at idle) are 3.11, 4.85, 11.52. Any of you guys still have that link to how to mod an Antec TruePower?

i think it's your wire connections/connector that's making it so low

Huh?

 

[TD77077]

I've got two Enlight 360s and an Enlight 420 - all good.

 

[maluckey]

I run Fortron FSP-400's in both of my OC'ed setups. I like the adjustability, and the bulletproof design. You can short the terminals on these units, and they just shut down, then restart. You gotta love an idiot-proof P/S like this.

 

[pelikan]

Originally posted by: myocardia
I'm running an Antec TruePower 480 that I need to either replace or mod. It's rail (at idle) are 3.11, 4.85, 11.52. Any of you guys still have that link to how to mod an Antec TruePower?

The mod is somewhere at Xtreme Systems. Make sure you are measuring your rails with a DMM.