When I oc my 1600+xp to 1.75ghz by bumping fsb to 166mhz I get a lock up when running prime95 after several minutes. I don't think the problem is in ocing, I think my problem might be in a PSU, I'm using an Enermax 350watt PSU and it seems real bad in mtherboard monitor. +3.3v is 1.60, on 5v line I get 4.89 and it drops as low as 4.7 when CPU is under load. Finally, Vcore is the worst of them all. In BIOS it's set at default at 1.75v, but in reality motherboard monitor shows it's only 1.71v. When under CPU stress, Vcore goes haywire. I raise it in bios to offset for this mistake to say 1.8 but it will actually be 1.75 when I boot. Furthermore, it fluctuates big time, when CPU is under stress, it can fluctuate by as much as 0.05v, stuff like that, one moment it can be 1.78, another 1.74. Plus I heard that Enermax PSUs have problem with EPOX 8k9a boards. Do you guys think I should get better PSU? If so which one? Are Antec TruePower PSUs any good?