RoboTECH, you wrote.....
1) Close the L1 bridges, and you can adjust the multipliers
Close the L7 bridges, and your voltage is @ 1.85v that I understand.
I notice there is a way to adjust the default multiplier somehow. Yes, I read the page, but that was far too technical.....End quote.....
Not really...read it again. Article covers "all" degrees of oc'g mods,
from simple "close the L1 bridges then use mobo devices to oc"...to various "hard mods" for mobos with no oc'g support. See the oc'g summary at the bottom of page 1.
So readers can be "selective" and focus on what they "need to know".
Article was written to promote "understanding" of what's going on, so when a "hard mod" is the only option, it's perfectly clear how it's going to work. That leads to fewer mistakes than following a cookbook style "do this/do that" format. We don't believe anyone should go into "hard mods" unless they know/understand what's going on. When you're "changing" the FSB Multiplier or Vcore you should be sure that the "hard mods" are correct. That's where "understanding comes in.
We think it's best to know "why" closing all the L7 bridges sets Vcore = 1.85V...then you know how to reset to all the other options as well.
Give it another whirl...they're only simple DC HI/LO binary logic circuits, (if you need them).
John C.