Will the front USB connectors on an Antec P160 match the headers on my K8N Neo4 Platinum?

[KillerAngel]

I've looked at the layouts and I'm guessing they are a match, but they aren't exactly labeled identically, so I thought I would ask you guys before I actually hook it up and blow my header. Thanks in advance for any answers you reply with.

P160 case layout:
Pin1 - USB Power 1
Pin2 - USB Power 2
Pin3 - Negative Signal 1
Pin4 - Negative Signal 2
Pin5 - Positive Signal 1
Pin6 - Positive Signal 2
Pin7 - Ground 1
Pin8 - Ground 2
Pin9 - Key (No Connection)
Pin10 - Empty

K8N Neo4 layout:
Pin1 - VCC
Pin2 - VCC
Pin3 - USB0-
Pin4 - USB1-
Pin5 - USB0+
Pin6 - USB1+
Pin7 - GND
Pin8 - GND
Pin9 - Key (no pin)
Pin10 - USBOC

 

[KillerAngel]

Bump. Anybody use this combo or know if these pins are identical?

 

[Markfw]

looks fine to me. Every Antec case I have works.

 

[KillerAngel]

Thanks for the reply.

 

[fell8]

In all likelyhood you won't have a problem. Most MBs and cases use industry standard pinouts. I have seen cases that have separate connecters (as opposed to a harness) for their USB ports, presumably for compatibility with non-standard MBs, but I've never come across one of these MBs.

 

[KillerAngel]

Thanks again, I guess I'll give it a shot.

 

[Greenman]

You're going to love that case.

 

[chrisralston]

Does anyone have this combo? I do and my USB ports are working as 1.1 not 2.0! If anyone has a solution (besides cutting a wire [suggested elsewhere]) let me know.