Originally posted by: Paratus
I was able to complete 3Dm06 with no issues. Temps topped out around 78C - the fan never seemed to spin up any faster.
Score was 4154 with my P4 3.2 and X1950 PRO 580/1400 at stock with supplied drivers.
Originally posted by: Paratus
The interesting thing is the packaging was slightly different from my first one. The new card was missing the extra software CD and the Diamond software version on the driver CD was 7.6 instead of 7.1.
I'm running the
Sapphire X1950PRO 512MB
I've tried the Cat. 6.12, the Omega (based on Cat. 7.1), and now the Cat. 7.2...
With
ALL of these drivers, if I installed the software along with them, I would get
a "Hang" when Booting up/Shutting down... I am now running
JUST the Cat.
7.2 drivers by themselves and "ONLY" using
Riva Tuner 2.0 Final to control things
like the fan speed...
I'm getting, depending on ambient temp., 36-40C idle and 60-64C load with
fan at 100%... :thumbsup:
Running UT2004 @ 100% CPU usage I only top out at about 44-45C... :laugh:
Using just
Riva Tuner I no longer have the "Hang" problem and the
fan automaticaly rev's up when I boot (I run it on manual/fixed speed) to
whatever I set it too without having to have
Riva running in the
background like the other software did... I just made sure to check the
box "Load Fan Profile at Startup"... It seems to change the cards fan
settings in the card BIOS rather than as a "Soft Mod" that depends on the
software running to make the change... That's probably what was causing
the "Hang" in the first place with the other stuff...
Here's a link to
Riva Tuner 2.0 Final Release for anyone interested...
NOTE:
Riva Tuner will tell you it isn't updated for newer than Cat. 6.12 but so far I'm
not having any prob's with it... Haven't tried O'Clocking though as yet...
Hope this helps someone...
wizzard0003
\\//_