Try more QPI/VTT
Up to 1.35v is safe I believe.
There might be a BLK hole at that level, try 195.
Try manually setting your vcore. up to 1.35v is also safe.
I found this guide helpful.
Thanks but i think i have been trying QPI/VVT at 1.35v but its no change.I can go as low as 1.18v and it crashes at the same place.
Vcore doesnt change anything eather. I have not forced the Vcore to 1.35v . I have been useing Vcore dynamic and set the Vcore to normal and Vcoredyn... to 1. Not sure i need more as i see Vcore in HWinfo and maximum reading is 1.126volt .Do the CPU need more then 2.1volts then as normal is 1.1 something and +1.0000volt as dynamic?
I think this is a Ram issue as Prime crashed at lower BCLK before i set the Memory volts to 1.66 volts. Thats 0.01 volts more then the specifications for these. I cant get higher then that before i will damage my mem controller in the CPU ? 1.66volts is red in my bios so its pretty high
The thing is that i could push my core I7 to 3.6Ghz just increasing the BCLK. All other settings vas set to Auto, Even the memory timings!
With this 6 core i need to set the timings manually. There are a lot of different parameters and therefor i would like to find someone with a hexacore and 6 sticks of these memorys to compair with. So far i have found nothing.
I will post all my settings in detail when i get home from work. Hopefully someone can spot something thats wrong:$
My gole is to run this at 3.6GHz stable and then go back to 3.4 and tweak all settings. But for now i have no base to go on:'(
Thanks again for helping!