Hey fellas,
I'm running an EPOX 8rda+ with latest bios. Picked up a 1700+ from SVC with stepping DLT3C, SPMW 0308...
For cooling, Thermalright SK-7, AS2, and a 92MM Papst fan. The fan pushes between 50-60CFM is quite quiet, and has a very large hub.
My case is an antec sx830 I believe, with 3 front 80MM Panaflo L1As, and 2 exhaust L1As and the PSU fan.
Right now the processor is stable at 200x11.5=2300MHZ. Voltage is 1.8v.
Prime95 has been running about 2 hours and has stabalized about 53-54C, it fluctuates. No errors in P95.
I am just a little concerned that these temps maybe a little high, also I think the HSF would be good enough to keep it lower. I think the hub on the 92MM fan maybe too large and creating a big deadspot in the center of the heatsink (the hub is roughly 1/2 the size of the entire 'sink). Anyone think that using a Thermaltake Smart Fan1 80MM (50CFM tops), would be a better (louder..) idea?
I'm running an EPOX 8rda+ with latest bios. Picked up a 1700+ from SVC with stepping DLT3C, SPMW 0308...
For cooling, Thermalright SK-7, AS2, and a 92MM Papst fan. The fan pushes between 50-60CFM is quite quiet, and has a very large hub.
My case is an antec sx830 I believe, with 3 front 80MM Panaflo L1As, and 2 exhaust L1As and the PSU fan.
Right now the processor is stable at 200x11.5=2300MHZ. Voltage is 1.8v.
Prime95 has been running about 2 hours and has stabalized about 53-54C, it fluctuates. No errors in P95.
I am just a little concerned that these temps maybe a little high, also I think the HSF would be good enough to keep it lower. I think the hub on the 92MM fan maybe too large and creating a big deadspot in the center of the heatsink (the hub is roughly 1/2 the size of the entire 'sink). Anyone think that using a Thermaltake Smart Fan1 80MM (50CFM tops), would be a better (louder..) idea?